tm piston

[juzze]

Hi im just trying to get hold off a piston for my tm125 1974 model it has a honda m1 piston at the moment  which is 020 bigger than standard.

[cyclegod]

If you want one that is the same size that you have now (.020" = 0.50mm over standard (56.5mm)) see below...

http://cgi.ebay.com/ebaymotors/73-75-SUZUKI-TM125-K-L-RM125-M-PISTON-50-OS-NOS-NEW_W0QQcmdZViewItemQQ_trksidZp3286Q2ec0Q2em14QQhashZitem56303fdbb6QQitemZ370176678838QQptZMotorcyclesQ5fPartsQ5fAccessories

http://cgi.ebay.com/ebaymotors/Suzuki-TS125-Ring-Set-Oversize-0-5_W0QQcmdZViewItemQQ_trksidZp3286Q2ec0Q2em14QQhashZitem3c8e2c99cdQQitemZ260083325389QQptZMotorcyclesQ5fPartsQ5fAccessories

If you want a larger oversize 0.75mm-2.0mm (.030-.080) then you can fit TS/DS/TF125 pistons made by PRO-X, available in 0.25mm increments, however the skirt length is 5mm longer than the TM piston but I have been told this does not have much effect on the TM.