« previous next »
Pages: [1]   Go Down

Author Topic: yz125 pistons  (Read 1029 times)

0 Members and 1 Guest are viewing this topic.

Offline TT5 Matt

  • Legend
  • *****
  • Posts: 1538
    • View Profile
yz125 pistons
« on: May 25, 2009, 07:10:08 pm »
will a 85 yz125 piston go into a yz125e 78 model? they both share the same bore/stroke and piston pin so does anyone know or tried this combo?


TT5 Matt
Logged

Offline caps 999

  • Legend
  • *****
  • Posts: 1762
    • View Profile
Re: yz125 pistons
« Reply #1 on: May 25, 2009, 07:42:40 pm »
dont know about that one it think 76-82 intechange but later i dont know
Logged
MUGEN power

Offline Nathan S

  • Superstar
  • ******
  • Posts: 7275
  • HEAVEN #818
    • View Profile
Re: yz125 pistons
« Reply #2 on: May 25, 2009, 08:58:12 pm »
Yes, it will work.
Yamaha has a squillion different part numbers because they were forever tweaking stuff like the number and thickness of rings and the skirt cut-away, but the pistons are 100% interchangable. They will all also interchange with DT and IT125 pistons.

I know that Wiseco has a different part number for the 85 compared to the earlier bikes, but I can't spot the difference.

The YZ-A piston kits have a different part number because they use a different ring to suit the chrome bore. The piston itself is 100% interchangable.

Logged
The good thing about telling the truth is that you don't have to remember what you said.

Offline oldyzman

  • Legend
  • *****
  • Posts: 2187
  • 250 two stroke!
    • View Profile
Re: yz125 pistons
« Reply #3 on: May 25, 2009, 09:25:39 pm »
hey nathan, is the skirt the same.  ie to give the same port timing on inlet..
Brett
Logged
I have a soft spot japanese mxers with aluminium tanks. Two stroke classic Dirt Track...
Pages: [1]   Go Up
« previous next »