« previous next »
Pages: [1]   Go Down

Author Topic: PE400 coils  (Read 2049 times)

0 Members and 1 Guest are viewing this topic.

Offline Grunter215

  • B-Grade
  • ***
  • Posts: 166
    • View Profile
PE400 coils
« on: April 05, 2009, 04:42:45 pm »
Well .. the plug lead snapped off today so wondering what options. Anyone been there done that?
Logged

Offline LWC82PE

  • Superstar
  • ******
  • Posts: 6006
    • View Profile
    • PE motorcycles & SuzukiTS.com
Re: PE400 coils
« Reply #1 on: April 05, 2009, 04:48:27 pm »
quite possible to repair. you will have to dig away at the plastic to be able to get some bare wire, then solder on a new plug wire. then cover up the repair with an epoxy glue or fibreglass resin or similar. you have got nothing to loose.
Logged
Wanted - 1978 TS185 frame or frame&motor. Frame # TS1852-24007 up to TS1852-39022

Offline Grunter215

  • B-Grade
  • ***
  • Posts: 166
    • View Profile
Re: PE400 coils
« Reply #2 on: April 05, 2009, 05:13:27 pm »
Are aftermarket ones avialable?? Repair as last option
Logged

oldfart

  • Guest
Re: PE400 coils
« Reply #3 on: April 05, 2009, 05:16:20 pm »
Trim off at plastic, screw in a S/S 25mm long course screw about 12mm trim off head and create a point . Screw on lead and apply a dob of silicon sealant  just before if makes contact with plastic and tighten up
Logged

Offline Lozza

  • Legend
  • *****
  • Posts: 4206
    • View Profile
Re: PE400 coils
« Reply #4 on: April 05, 2009, 05:18:20 pm »
Use $12 pit bike coil fine for HV ignitions
Logged
Jesus only loves two strokes

oldfart

  • Guest
Re: PE400 coils
« Reply #5 on: April 05, 2009, 05:18:26 pm »
Yes after market are available. But are not a bolt up out of the bag item.  
Logged

Offline Grunter215

  • B-Grade
  • ***
  • Posts: 166
    • View Profile
Re: PE400 coils
« Reply #6 on: April 05, 2009, 05:43:57 pm »
Thanks ..i think ill give it a go repairing it
Logged

Offline Grunter215

  • B-Grade
  • ***
  • Posts: 166
    • View Profile
Re: PE400 coils
« Reply #7 on: April 15, 2009, 06:55:25 pm »
Hey Oldfart, did your method of repairing the coil..works a treat!! Thanks.
Logged

Offline Tex

  • Legend
  • *****
  • Posts: 1358
    • View Profile
Re: PE400 coils
« Reply #8 on: April 16, 2009, 09:52:37 am »
Quote
Use $12 pit bike coil fine for HV ignitions

I see these on ebay all the time and wondered if they'd be ok. They often state that they're for 125cc four stroke pit bikes etc, does mean they'd still work ok on a two stroke motocross bike?

Is there any particular type to look for?

Tex

Logged
Pages: [1]   Go Up
« previous next »