Maico gearbox parts

[Husabergpete]

Guys at yesterdays race meeting I lost the following parts off my 1977 AW 250.

The sit on top of the gearbox beside the carby and fit into the gear selector plate. There is like a hollow dome nun/screw that pushes the spring down onto a pin that fits into the selector plate indents. (stops the 1000 false neutrals)

1/  Pin pawl - part # 3415

2/  Compression spring - part # 3422

3/ Tension spring holder screw - part # 3417

Located in Wollongong 80 ks south of Sydney

Thanks

Pete

[Mick D]

There you go, click on the pic for Ebay link

[bazza]

Chippys maico
support Auzie company

[Mick D]

Well Bazza, obviously he has already rang Chippy(Paul) or the other Paul(Stackers) first 

Unless Pete was hoping for a santa

(Paul)  is Chippy direct link

[Husabergpete]

Gents thanks for the help. As it turns out I am a bit out of the loop with Pauls business. I know Paul as he helped me with the original build about 4 years ago. I given him a call and left a message through the business web site.

Need to get a wriggle on as Bathurst meeting just around the corner.

Once again thanks.

Pete

[Husabergpete]

Will a 1978 400 pin nut and spring fit. One on ebay now

ta

Pete

[Mick D]

Will a 1978 400 pin nut and spring fit. One on ebay now

ta

Pete

I think you would be able to compensate? and get the 78 one to work, but they are different Pete(the 78 has a much longer thread for a start).

I can garantee that the pic/Ebay link I put up is most definitely the correct one.
I see it has been sold now. I hope its on its way to the Gong. Cheers.

[Husabergpete]

Hi Mick,
 
Yes I hit the Ebay button on those gear box bits. there was about 20 hours to go and started to think I wouldn't find anything locally.

I have been in touch with Chippy over the phone. He was on the hunt for me too. Top hand that Chippy. Wasn't aware he had kicked up Maicos at Chippys.

Over the years he has helped both myself and Reg with our AW 250 restos. Well before it was a business

Thanks for help

Pete