« previous next »
Pages: [1]   Go Down

Author Topic: WTB- 18" 36 hole, alloy rim, Honda spoke 167mm & 36 x 4mm alloy nipples.  (Read 1006 times)

0 Members and 1 Guest are viewing this topic.

Offline John Orchard

  • Legend
  • *****
  • Posts: 3065
  • ^^^ July 1984
    • View Profile
WTB- 18" 36 hole, alloy rim, Honda spoke 167mm & 36 x 4mm alloy nipples.
« on: February 23, 2015, 05:27:46 pm »
Chasing an alloy rim, silver, 36 hole in either 2.15 or 2.50 width.

Chasing a set of 36, 4mm alloy spoke nipples.

Chasing one RH spoke to suit '86 CR250/500, 4mm, straight-pull, 167mm long.

What may you have?
Logged
Johnny O - Tahition_Red factory rider.

Offline LWC82PE

  • Superstar
  • ******
  • Posts: 6006
    • View Profile
    • PE motorcycles & SuzukiTS.com
Re: WTB- 18" 36 hole, alloy rim, Honda spoke 167mm & 36 x 4mm alloy nipples.
« Reply #1 on: February 23, 2015, 05:51:57 pm »
Spoke nipples are here

http://www.smprowheels.co.uk/nipple-sets/alloy-nipple-sets.html

Rim request is a bit too broad. Is it for disc, drum, even/un-even flange size? You can't use any 36 hole rim with any 36 hole hub. Theres different angles and cross patterns
Logged
Wanted - 1978 TS185 frame or frame&motor. Frame # TS1852-24007 up to TS1852-39022

Offline John Orchard

  • Legend
  • *****
  • Posts: 3065
  • ^^^ July 1984
    • View Profile
Re: WTB- 18" 36 hole, alloy rim, Honda spoke 167mm & 36 x 4mm alloy nipples.
« Reply #2 on: February 23, 2015, 08:13:35 pm »
Thanks to Momus for the stuff.
Logged
Johnny O - Tahition_Red factory rider.

Offline Paul552

  • Legend
  • *****
  • Posts: 672
  • HEAVEN #552
    • View Profile
Re: WTB- 18" 36 hole, alloy rim, Honda spoke 167mm & 36 x 4mm alloy nipples.
« Reply #3 on: February 23, 2015, 08:38:33 pm »
I have stock front and rear off a 84 cr250 re but they were powder coated.
Not sure if you are looking for perfect ones or just rims  ;D
Logged
'77 YZ125D '84 CR250RE '89 CR250RK '84 CR80RE  '09 YZ250F
Pages: [1]   Go Up
« previous next »