Author Topic: 1978 RM125C  (Read 1219 times)

0 Members and 1 Guest are viewing this topic.

Offline BAHNZY

  • Legend
  • *****
  • Posts: 1149
    • View Profile
1978 RM125C
« on: June 09, 2014, 02:41:19 pm »
1978 RM125C
This was originally going to be a get going and ride project, it was never going to be a restorer for me, I just wanted a spare bike that I could take to a practice day or use at the local pay as you ride track and not be concerned about wearing out my restored race bike.  This  is a what you see is what you get and I can’t comment on the operation of any or all of the sum parts as I purchased what you see over the years and never got around to putting it together. There is a barrel and head that are buried in the back of the shed however the carbie is missing.
The important things like the output shaft, gear lever shaft and kick-starter shaft haven’t been welded up by a bush mechanic. The side stand is there along with the CDI and stator and the chain tensioner. The expansion chamber is o/k save for the stinger having been cut off. All of the consumables have been tossed and anything rubber is well beyond it serviceable limit. Two spare frames and a good set of tyres come with the bike.

I know what I paid for all the bits and pieces over time and never expect to get anywhere near that back but id like to think that it’s worth $600 to $700. I’d also be interested in swapping for a dead Husaberg from  the 1995 to 2000  years (or parts) with an agreed cash difference either way.

The bike has a frame number of RM125-81951 and en engine number of RM125-82471
The two spare frames are RM125-71814 & RM125-71781
PM with questions and ill do my best to answer them. ROD















« Last Edit: June 09, 2014, 02:51:52 pm by BAHNZY »
Rod (BAHNZY) Bahn

Offline Davey Crocket

  • Legend
  • *****
  • Posts: 4408
    • View Profile
Re: 1978 RM125C
« Reply #1 on: June 09, 2014, 05:37:34 pm »
PM sent
QVMX.....Australia's #1 VMX club......leading the way.