Author Topic: Hi from sydneysider  (Read 3606 times)

0 Members and 1 Guest are viewing this topic.

Offline mr500

  • Novice
  • *
  • Posts: 19
    • View Profile
Hi from sydneysider
« on: February 20, 2013, 10:45:56 pm »
Hi all ,new to the fourm.
Looking to get into the vintage scene with maybe an mid '80's cr500.
(yet to purchase) but been looking for a while.
Be good to get any tips on where to get a fairly clean '86-'87?
cheers
Smoke'n..

Offline oldyzman

  • Legend
  • *****
  • Posts: 2187
  • 250 two stroke!
    • View Profile
Re: Hi from sydneysider
« Reply #1 on: February 20, 2013, 11:10:10 pm »
Welcome mr500,
Good luck finding the right bike, if you are considering racing then take note that84 bikes are the latest model allowed in pre 85  and also pre90 and so on.  I believe an 86 or 87 could only run in pre90 of which you might want to check what events are currentlt available in the type of race you wanna run.
Brett
I have a soft spot japanese mxers with aluminium tanks. Two stroke classic Dirt Track...

Simo63

  • Guest
Re: Hi from sydneysider
« Reply #2 on: February 20, 2013, 11:16:14 pm »
Hi Mr500

Welcome aboard.  You've come to probablky the best VMX forum in Australia.

In relation to your bike search, here is a link to a very nice CR500 that is currently available from a forum member:

http://ozvmx.com/community/index.php?topic=27531.0

The seller, James, is a top bloke and whilst I haven't seen this bike in person, I recall his excitement when he first purchased it due to the fact it was such a good original bike.  Eligible for pre 90 events.

Cheers
Craig

Offline b490

  • Legend
  • *****
  • Posts: 541
    • View Profile
Re: Hi from sydneysider
« Reply #3 on: February 21, 2013, 10:17:31 pm »
Welcome "Mr 500",
   
  Great forum here, 
      
  Gotta love the big-bore bikes  8).
 
   Hope you find a good one soon .
 
Regards ,
                Steve
« Last Edit: February 21, 2013, 10:22:16 pm by b490 »

Offline Barra

  • C-Grade
  • **
  • Posts: 107
    • View Profile
Re: Hi from sydneysider
« Reply #4 on: February 21, 2013, 11:00:49 pm »
Hi mr500, I'm a newbie here too. Lots of good people. 

Pity you look like you are a red blood, as when it comes to 500 motors their can only be one king in my opinion - KTM! (although never experienced the legendary Maico) :-\ Magnificent grunt - just turn the dial on the right 'bar as to how much torque you wanted - instantly! 

I rode a couple CR 500's, I remember one ride in particular. At a familiar track, a friend said "here ya go" so I had a ride of his CR. One section I loved - a right hand power on sweeper - a steer with the back wheel sort of corner.  Each lap I was lovin' this CR getting more and more brave when all of a sudden - POW! Steered me right over the highside and into the dirt! It was like a light switch! 

They are a sweet looking thing though, always had a soft spot for Hondas.     

Offline firko

  • Superstar
  • ******
  • Posts: 6578
    • View Profile
Re: Hi from sydneysider
« Reply #5 on: February 22, 2013, 11:09:52 am »
Welcome aboard Mr500.
'68 Yamaha DT1 enduro, '69 Yamaha 'DT1 from Hell' '69 DT1'Dunger from Hell, '69 Cheney Yamaha 360, 70 Maico 350 (2 off), '68 Hindall Ducati 250, Hindall RT2MX, Hindall YZ250a , Cycle Factory RT2MX flat tracker, Yamaha 1T250J, Maico 250 trials, '71, Boyd and Stellings TM400, Shell OW72,750 Yamaha

Offline mr500

  • Novice
  • *
  • Posts: 19
    • View Profile
Re: Hi from sydneysider
« Reply #6 on: February 24, 2013, 11:02:44 pm »
Thanks everyone ,I've even been put onto a few bikes.
 Hi Steve... ;)http://


Smoke'n..

Offline Dono113

  • Legend
  • *****
  • Posts: 535
    • View Profile
Re: Hi from sydneysider
« Reply #7 on: February 25, 2013, 10:33:38 am »
1983 CR125R
2003 CRF450R
CB750K1
2005 YZ85
1969 TS 250

Offline mr500

  • Novice
  • *
  • Posts: 19
    • View Profile
Re: Hi from sydneysider
« Reply #8 on: March 03, 2013, 10:13:00 pm »
http://www.ebay.com.au/itm/Honda-Cr500-1986-/221193142305?pt=AU_Motorcycles&hash=item3380238021
Clean CR500 champ, but should consider the RMs ;D

Thanks mate
I'd seen that one and it was mine if only it was in NSW....
Why are all the good bike's is in VIC or Qld??
 
Smoke'n..

Simo63

  • Guest
Re: Hi from sydneysider
« Reply #9 on: March 03, 2013, 10:46:26 pm »
Why are all the good bike's is in VIC or Qld??
 

Because that's where all the good riders are  ;D ;D

Well .. someone had to say it

Offline foxy999

  • Legend
  • *****
  • Posts: 519
    • View Profile
Re: Hi from sydneysider
« Reply #10 on: March 04, 2013, 08:29:21 pm »
sounds good to me, welcome mate.... one bike will turn into a shed full    ;D 
My fastest lap is the first one :)

Offline whitey 43

  • A-Grade
  • ****
  • Posts: 363
    • View Profile
Re: Hi from sydneysider
« Reply #11 on: March 08, 2013, 05:09:31 pm »
its like a disease....A good one... :D

Offline mr500

  • Novice
  • *
  • Posts: 19
    • View Profile
Re: Hi from sydneysider
« Reply #12 on: March 10, 2013, 11:31:19 pm »
http://www.ebay.com.au/itm/Honda-Cr500-1986-/221193142305?pt=AU_Motorcycles&hash=item3380238021
Clean CR500 champ, but should consider the RMs ;D

Thanks mate
I'd seen that one and it was mine if only it was in NSW....
Why are all the good bike's is in VIC or Qld??
 

 
What I really meant was.."Why are all the garage queens in Vic or Qld?"

Was just being nice before ;)
Smoke'n..