Author Topic: CR 500 ITC shocks (Read 2665 times)

HL400 · « **on:** April 04, 2012, 05:33:44 pm »

Hi all, what type of oil goes in a 1983 CR 500 ITC shocks. HL

HL400 · « **Reply #1 on:** April 04, 2012, 07:37:12 pm »

Thanks for that wasp, but I'am trying give the rear shocks a bit more dampening I thought if I went to a thicker oil I will get more dampening ?
HL

JohnnyO · « **Reply #2 on:** April 04, 2012, 07:55:39 pm »

Thicker oil will heat up and fade faster than thin oil, you'd be better off revalving to change dampening. Do you want more compression and rebound dampening?

HL400 · « **Reply #3 on:** April 04, 2012, 08:12:26 pm »

Thanks JohnnyO, I'am after more rebound Dampening but not to sure where to start. HL

JohnnyO · « **Reply #4 on:** April 04, 2012, 08:55:22 pm »

The rebound stack needs to be changed either by going to some thicker shims and/or more shims

HL400 · « **Reply #5 on:** April 05, 2012, 05:46:40 pm »

Sounds good but where do I get the shims from

HL

JohnnyO · « **Reply #6 on:** April 05, 2012, 05:53:42 pm »

Steve Cramer products.. the Ohlins importer

NSR · « **Reply #7 on:** April 05, 2012, 07:29:41 pm »

I have ohlins shims and a specs for the ITC shock. It is a CR not a WR?

Have the shocks been apart? Maybe the shims on the piston have been put in wrong.

Cheers
Noel

OzVMX Forum

Author Topic: CR 500 ITC shocks (Read 2665 times)

HL400

CR 500 ITC shocks

HL400

Re: CR 500 ITC shocks

JohnnyO

Re: CR 500 ITC shocks

HL400

Re: CR 500 ITC shocks

JohnnyO

Re: CR 500 ITC shocks

HL400

Re: CR 500 ITC shocks

JohnnyO

Re: CR 500 ITC shocks

NSR

Re: CR 500 ITC shocks