Author Topic: MX100A, very original. SOLD!  (Read 3104 times)

0 Members and 1 Guest are viewing this topic.

Offline Nathan S

  • Superstar
  • ******
  • Posts: 7275
  • HEAVEN #818
    • View Profile
MX100A, very original. SOLD!
« on: September 30, 2010, 01:56:44 pm »
The good:
Mostly unmolested bike in much better than average condition - still has the original front tyre!
Decent compression.
Good spark.
Good chain & sprockets (believed to be the originals).
Original levers, grips, etc.
Old style Renthal bars (straight originals included).
Good rear tyre (about 70%?) and very good replacement front tyre included.
New VMX-Plastics front number plate.
Almost brand new NOS/NLA LHS side-cover (see pics). Excellent RHS side cover. You don't want to know how much I paid for these...

The Bad:
Something wrong with the kick-starter mech. I discovered a circlip off the idler gear, and replaced it. On the third kick, the gear lever didn't return (can easily be pulled back up by hand). Then I got the poops and decided to sell the bike...
Gear lever wobbly in pivot (Davey Crocket can rebush them).
Rear guard could do with being scraped back.

Other stuff:
Autolube all present and intact, except for the oil tank cap. The side cover on the bike has the factory oil-pump blanking plate, which I think means its a YZ125A part(?).
Spare, original handle bars are straight and not cut down, but could do with a rechrome.
Front numberplate not fitted to give buyer the choice of original fittings, or the later style wire clips (I can supply the later style).
I cleaned the carby float bowl, and it was free of the usual gunk.
The old gearbox oil came out beautifully clean, free of sludge and/or 'sparkly bits'.
After the kick-starter screwed up, I clutch started it - bike fired and ran but stalled before I could find neutral.

Anyhow, here's the pics:























$750ono, in Yass, southern NSW (near Canberra).
SOLD.

Nathan 04000 23847

« Last Edit: October 07, 2010, 12:16:43 am by Nathan S »
The good thing about telling the truth is that you don't have to remember what you said.

Offline Freakshow

  • Superstar
  • ******
  • Posts: 7277
  • Adelaide, SA - looking for a "YZA" tank
    • View Profile
Re: MX100A, very original.
« Reply #1 on: September 30, 2010, 02:49:40 pm »
Thats a good buy for any one thats looking.
74 Yamaha YZ's - 75 Yamaha YZ's
74 Yamaha  flattracker's
70  Jawa 2 valve speedway's

For sale -  PRE 75 Yamaha MX stuff, frame, motors and parts also some YAM DT1,2,A and Suzi TS bikes and stuff

Offline Nathan S

  • Superstar
  • ******
  • Posts: 7275
  • HEAVEN #818
    • View Profile
Re: MX100A, very original.
« Reply #2 on: October 04, 2010, 10:50:18 pm »
Now on Epay, $600 starting bid.

http://cgi.ebay.com.au/Yamaha-MX100A-original-ride-restore-1974-VMX-AHRMA-/110594362379?pt=AU_Motorcycles&hash=item19bff00c0b

Will take $600 for quick sale. Also possibly delivery to western Sydney, if that helps?

The good thing about telling the truth is that you don't have to remember what you said.

Offline Tim754

  • Legend
  • *****
  • Posts: 4011
  • Northern Country Victoria
    • View Profile
Re: MX100A, very original.
« Reply #3 on: October 05, 2010, 05:33:53 pm »
Grumble grumble  Nathan and Freaky are breaking my heart at present... :( All those special machines and all I can do is look longingly at the piccies..... Cheers Tim754
I may not agree with what you have to say, but I'll defend to the death your right to say it.
                                                   Voltaire.

Offline Freakshow

  • Superstar
  • ******
  • Posts: 7277
  • Adelaide, SA - looking for a "YZA" tank
    • View Profile
Re: MX100A, very original.
« Reply #4 on: October 05, 2010, 09:02:57 pm »
Will a 125 fit in these frames ? and are they the same as the mx125 full size frame ?
74 Yamaha YZ's - 75 Yamaha YZ's
74 Yamaha  flattracker's
70  Jawa 2 valve speedway's

For sale -  PRE 75 Yamaha MX stuff, frame, motors and parts also some YAM DT1,2,A and Suzi TS bikes and stuff

Offline Nathan S

  • Superstar
  • ******
  • Posts: 7275
  • HEAVEN #818
    • View Profile
Re: MX100A, very original.
« Reply #5 on: October 06, 2010, 02:23:10 pm »
At this point, I believe the bike is sold - just waiting to see the money in my account before making it official.

But I'm confidant enough that I've pulled the ad from Ebay.

Freaky, Yes and yes.
The good thing about telling the truth is that you don't have to remember what you said.

Offline Freakshow

  • Superstar
  • ******
  • Posts: 7277
  • Adelaide, SA - looking for a "YZA" tank
    • View Profile
Re: MX100A, very original.
« Reply #6 on: October 06, 2010, 03:49:41 pm »
OOOhhh wish i new that ealier.

If a MX125a fits straight in.  Im good to sit as your second reserve buyer, nath.
74 Yamaha YZ's - 75 Yamaha YZ's
74 Yamaha  flattracker's
70  Jawa 2 valve speedway's

For sale -  PRE 75 Yamaha MX stuff, frame, motors and parts also some YAM DT1,2,A and Suzi TS bikes and stuff

firko

  • Guest
Re: MX100A, very original.
« Reply #7 on: October 06, 2010, 04:20:21 pm »
I'll soon be selling my 1974 Yamaha MX125 and a shitload of NOS and Wiseco 125 and other small sized pistons, rings and other associated stuff. I'm busy on some writing projects at present but when I've got them knocked over I'll give the bike a cosmetic tidy up, check it over and collate what bits and pieces are going in the deal. I'll then offer the stuff up here first  but if there's no takers it'll go on eBay. I'm hoping to sell everything together as a package rather than go through the dramas of listing every part seperately. Life's too short for that shit ::).  The bike's absolutely original down to the front tyre with the exception of currently having a DT175 top end fitted (the original standard bore top end comes with the bike).
                   
« Last Edit: October 06, 2010, 04:25:01 pm by firko »

Offline frostype400

  • Legend
  • *****
  • Posts: 2496
    • View Profile
Re: MX100A, very original.
« Reply #8 on: October 06, 2010, 05:33:14 pm »
Nice mx125 firko, what are the forks like I know it took me ages to get a good set for my gt80 all the small yamaha's forks seem to rust up very quickly.

I am waiting for you to sell that 400 of yours firko. ;)
1971 tm400 and PE's

Offline Tim754

  • Legend
  • *****
  • Posts: 4011
  • Northern Country Victoria
    • View Profile
Re: MX100A, very original.
« Reply #9 on: October 06, 2010, 08:26:37 pm »
Grumble grumble  Nathan and Freaky are breaking my heart at present... Sad All those special machines and all I can do is look longingly at the piccies..... Cheers Tim754
Now even Firko is ripping at me heart....... ;) Tim754   :o  Very very nice 125 there Mark!
I may not agree with what you have to say, but I'll defend to the death your right to say it.
                                                   Voltaire.

Offline SimonC

  • B-Grade
  • ***
  • Posts: 201
    • View Profile
Re: MX100A, very original. SOLD!
« Reply #10 on: October 07, 2010, 12:11:24 pm »
I am still looking for a head for my MX125A if anybody has a spare one.

Cheers

Simon

Offline Davey Crocket

  • Legend
  • *****
  • Posts: 4408
    • View Profile
Re: MX100A, very original. SOLD!
« Reply #11 on: October 08, 2010, 06:26:38 pm »
I have a webco head to suit.
QVMX.....Australia's #1 VMX club......leading the way.

Offline SimonC

  • B-Grade
  • ***
  • Posts: 201
    • View Profile
Re: MX100A, very original. SOLD!
« Reply #12 on: October 21, 2010, 06:02:51 pm »
Webco head sounds interesting - have you any pics?

Does it fit ok under standard pipe?

Cheers

Simon