« previous next »
Pages: [1]   Go Down

Author Topic: rm shockers  (Read 1302 times)

0 Members and 1 Guest are viewing this topic.

Offline steve7406

  • A-Grade
  • ****
  • Posts: 347
    • View Profile
rm shockers
« on: September 20, 2010, 05:15:10 pm »
Nearly finished  a rebuild on a rm250t want to put piggyback shocks on it what lenth should they be.
Logged
2000 Yamaha WR400f
1980 Suzuki RM250t
1977 Suzuki RM125b                                         
1975 Yamaha MX250b
1973 Yamaha mx360 (on the rebuild table)                                                               
1972 Yamaha dt1 250
1976 Suzuki ts 185

oldfart

  • Guest
Re: rm shockers
« Reply #1 on: September 20, 2010, 05:19:44 pm »
STD are around 16''  or  407mm
Logged

Offline LWC82PE

  • Superstar
  • ******
  • Posts: 6006
    • View Profile
    • PE motorcycles & SuzukiTS.com
Re: rm shockers
« Reply #2 on: September 20, 2010, 05:48:38 pm »
Check your measurement Stew, original is under 400mm about 396/397mm. 407mm would probably still be ok though.

Steve, if you want to get rid of your original 250T shocks let me know.
« Last Edit: September 20, 2010, 05:51:44 pm by LWC82PE »
Logged
Wanted - 1978 TS185 frame or frame&motor. Frame # TS1852-24007 up to TS1852-39022

Offline suzuki27

  • Legend
  • *****
  • Posts: 853
    • View Profile
Re: rm shockers
« Reply #3 on: September 20, 2010, 06:09:31 pm »
Stick with standard or a few mm either side.  385mm to 395mm is best.This will change if you change the front end etc. The RMT's get a bit weird after 405mm - even at 405mm I reckon.  Stay close to stock.
Logged
Pages: [1]   Go Up
« previous next »