Author Topic: ADB article by Paul Rooney on Husky Autos  (Read 3147 times)

0 Members and 1 Guest are viewing this topic.

Offline PEZBerq

  • Legend
  • *****
  • Posts: 1094
  • Brisbane
    • View Profile
ADB article by Paul Rooney on Husky Autos
« on: June 15, 2010, 09:36:49 pm »
Just spoke to Paul Rooney (great wealth of knowledge on all things Huskys and hell of a nice guy) and he tells me he wrote an article on how to get the best out of the autos for the ADB magazine in the early to mid 80's. Does anyone recall the article  ??? ??? and if so is a photocopy possible  :-* :-* Thanks Steve
Husqvarnas: 78 390AMX, 82 430XC, 84 240WR, 84 500AE, 84 510TE, 87 510TE

Offline Mike52

  • Legend
  • *****
  • Posts: 1834
  • 81 KTM 125 LC
    • View Profile
Re: ADB article by Paul Rooney on Husky Autos
« Reply #1 on: June 16, 2010, 09:53:55 pm »
Will have a look for ya. A bit later. Did have a look , havn,t got that one but had fun looking. Found a story on auto,s with photo,s of all the parts laid out.  :D
« Last Edit: June 16, 2010, 10:17:02 pm by Mike52 »
85/400WR,86/240WR,72/DKW125,Pe250c,TC90,TS100,XT250,86/SRX250,XR400r
Friend  struggling up a hill on a old bike at MTMee .http://www.youtube.com/watch?v=cjj6E2MP9xU.

Offline PEZBerq

  • Legend
  • *****
  • Posts: 1094
  • Brisbane
    • View Profile
Re: ADB article by Paul Rooney on Husky Autos
« Reply #2 on: June 17, 2010, 09:12:36 am »
Thanks for looking Mike. PM sent
Husqvarnas: 78 390AMX, 82 430XC, 84 240WR, 84 500AE, 84 510TE, 87 510TE

Offline Mike52

  • Legend
  • *****
  • Posts: 1834
  • 81 KTM 125 LC
    • View Profile
Re: ADB article by Paul Rooney on Husky Autos
« Reply #3 on: June 19, 2010, 02:08:45 pm »
Had another look and you wouldn,t believe it. Also found a S Gall lesson on riding in dust. Gotta read that. ;D
85/400WR,86/240WR,72/DKW125,Pe250c,TC90,TS100,XT250,86/SRX250,XR400r
Friend  struggling up a hill on a old bike at MTMee .http://www.youtube.com/watch?v=cjj6E2MP9xU.

Offline PEZBerq

  • Legend
  • *****
  • Posts: 1094
  • Brisbane
    • View Profile
Re: ADB article by Paul Rooney on Husky Autos
« Reply #4 on: June 28, 2010, 08:48:47 pm »
Thanks to Mike 52 the ADB article on secrets of the 500AE auto transmission and a test report on the 84 500AE are available in pdf format to those who are interested.  PM me and I'll email them to you.  Interesting to note they dropped the carb size from 40mm down to 38mm in 85 with great results.
Husqvarnas: 78 390AMX, 82 430XC, 84 240WR, 84 500AE, 84 510TE, 87 510TE

Offline Pedro

  • Novice
  • *
  • Posts: 30
    • View Profile
Re: ADB article by Paul Rooney on Husky Autos
« Reply #5 on: June 28, 2010, 09:22:59 pm »
Hello PZ,
There ain't no secrets to the 500 auto just a lot of time measuring spring tension and clutch drum clearance gone are the days of ringing husky imports and asking for a different spring rate same for all the autos! The auto gearbox is a magic piece of engineering it is a series of clutches that take up as rear wheel speed increases an auto stands out in mud, sand or rocks when on a manual you want to change gear the auto dose it for you, they are a great thing when you get to know them they work the same as your car change up as you gas on and have "NO engine breaking" when you back off  :-\
 
The carby size was dropped for ease of tunning which also caused a noticeable drop in performance for VMX the 40 is the go!
                                 ::) Husky AU

Offline PEZBerq

  • Legend
  • *****
  • Posts: 1094
  • Brisbane
    • View Profile
Re: ADB article by Paul Rooney on Husky Autos
« Reply #6 on: June 29, 2010, 07:26:48 am »
I guess one mans secret is another mans common knowledge  ;D ;D I would be keen to know how you measure the spring tension accurately Husky AU. Also what is the deal with clutch drum clearance?

Sorry I missed you at CD7 - visited your pits and saw your fine stable but missed you! Cheers
Husqvarnas: 78 390AMX, 82 430XC, 84 240WR, 84 500AE, 84 510TE, 87 510TE