Author Topic: MR50 Info needed  (Read 2106 times)

0 Members and 1 Guest are viewing this topic.

Offline Husk72

  • B-Grade
  • ***
  • Posts: 236
  • Attitude? What effing attitude?
    • View Profile
MR50 Info needed
« on: December 29, 2009, 10:08:51 am »
Having a hard time getting information for a MR that I've stripped down.
On the headstock theres a small stamped number with the date it was built,it reads 74121.I assume this would read 21.1.74.Is that right to begin with?Otherwise it would be 1.12.74.
Now when exactly were these manufactured?
Were they made in 1973 and released as 1974 models, etc?
If the one I have was built in early 1974,would it be considered the next years model,or a 1974 model?Assuming I've read the date correctly that is.
Any help at all much appreciated.


                                              Cheers,Mark.
I used to drink a lot.
I still do,but I used to,too.

Offline JohnnyO

  • Legend
  • *****
  • Posts: 4658
  • Qld
    • View Profile
Re: MR50 Info needed
« Reply #1 on: December 29, 2009, 10:24:23 am »
The MR50 came out as '74 and '75 models.. the red one was a '74 and the silver with red stripe was the '75. Don't think they were built in '73.
I don't know about the number stamped on the headstock, honda usually had a date stamp on a plate riveted to the headstock such as 1/74 for the date of manufacture.

Offline Husk72

  • B-Grade
  • ***
  • Posts: 236
  • Attitude? What effing attitude?
    • View Profile
Re: MR50 Info needed
« Reply #2 on: December 29, 2009, 02:01:34 pm »
Thanks for that Johnny.Mine is the Daytona orange colour,so its definately 1974.
Mine doesn't have a plate it just has the numbers.Ummm,I'll go have a quick peek.
Ok,its on the left hand side,on the supporting piece thats welded to the frame,and headstock.and its stamped.
I'm a frigging numbat,it actually reads 740121.Not 74121.Tossil I am.
So 21/01/74,she started at the frame stage.
I'll take some pics and try post them here.


                                                  Cheers,Mark.
I used to drink a lot.
I still do,but I used to,too.

retrobiker

  • Guest
Re: MR50 Info needed
« Reply #3 on: December 31, 2009, 09:17:25 am »
http://www.motorera.com/honda/h0050/elsinore/elsinore.htm
never had id tags,pre plate days,no many mx bikes ever had plates

the date stamp should be under the tank as well,
the bike was usually assembled in  between the 2 dates

Offline JohnnyO

  • Legend
  • *****
  • Posts: 4658
  • Qld
    • View Profile
Re: MR50 Info needed
« Reply #4 on: December 31, 2009, 09:24:30 am »
The '73, '74' '75 Elsinores had tags on the frame with date stamps.

Offline Husk72

  • B-Grade
  • ***
  • Posts: 236
  • Attitude? What effing attitude?
    • View Profile
Re: MR50 Info needed
« Reply #5 on: December 31, 2009, 10:04:16 am »
JohnnyO,does that mean tags were on the 50s model?Or just on Elsinores in general?


                                                 Cheers,Mark.
I used to drink a lot.
I still do,but I used to,too.

Offline JohnnyO

  • Legend
  • *****
  • Posts: 4658
  • Qld
    • View Profile
Re: MR50 Info needed
« Reply #6 on: December 31, 2009, 10:31:01 am »
Mark i'm not sure about the MR50 but they were on the 125 & 250. I don't have my MR50 close by to have a look at it.

Offline Tim754

  • Legend
  • *****
  • Posts: 4011
  • Northern Country Victoria
    • View Profile
Re: MR50 Info needed
« Reply #7 on: December 31, 2009, 11:33:31 am »
Scrivens Consolidated Industries  in Kerang Victoria (Honda dealer) Have/had one hanging on the wall for years of shop for display . Maybe a call to them.    ;D    No I don't, please look it. up....
I may not agree with what you have to say, but I'll defend to the death your right to say it.
                                                   Voltaire.