« previous next »
Pages: [1]   Go Down

Author Topic: PE Barrel Swap  (Read 1717 times)

0 Members and 1 Guest are viewing this topic.

Offline suzuki27

  • Legend
  • *****
  • Posts: 853
    • View Profile
PE Barrel Swap
« on: December 13, 2009, 12:48:59 pm »
Can anyone tell me if the PE250T/X head &  barrel will bolt onto an RM 250 T bottom end. Has anyone done it- or put the RM barrel onto the PE bottom end?. Thanks.
Logged

oldfart

  • Guest
Re: PE Barrel Swap
« Reply #1 on: December 13, 2009, 01:15:09 pm »
YES .....discussed at length some time ago.   In my opinion they are the same.
« Last Edit: December 13, 2009, 01:19:52 pm by oldfart »
Logged

Offline lukeb1961

  • Legend
  • *****
  • Posts: 1019
  • PE175N, RM80B, JR50C
    • View Profile
    • PE175N
Re: PE Barrel Swap
« Reply #2 on: December 13, 2009, 01:41:07 pm »
Yes, the same in all respects except for slight port height changes.

RM250T 11210-40302
PE250T 11210-40600

Logged

Offline suzuki27

  • Legend
  • *****
  • Posts: 853
    • View Profile
Re: PE Barrel Swap
« Reply #3 on: December 13, 2009, 01:58:42 pm »
Thanks for that . Looking for some more bottom end power and thought I would give it a try- with the PE head as well.
Logged

Offline LWC82PE

  • Superstar
  • ******
  • Posts: 6006
    • View Profile
    • PE motorcycles & SuzukiTS.com
Re: PE Barrel Swap
« Reply #4 on: December 13, 2009, 02:08:05 pm »
the RM250 T head is the exact same part number as the PE250 T/X/Z head. So you have nothing to gain by fitting a PE head on a RM.
Logged
Wanted - 1978 TS185 frame or frame&motor. Frame # TS1852-24007 up to TS1852-39022

oldfart

  • Guest
Re: PE Barrel Swap
« Reply #5 on: December 13, 2009, 02:16:37 pm »
Power to be made in changing to Rm pipe along with Boysen reeds

Notice barrel on LHS has had some port work at some stage @ reed block & transfer
Logged
Pages: [1]   Go Up
« previous next »