« previous next »
Pages: [1]   Go Down

Author Topic: Valve plate in forks  (Read 1825 times)

0 Members and 1 Guest are viewing this topic.

Offline tony27

  • Legend
  • *****
  • Posts: 1908
    • View Profile
Valve plate in forks
« on: November 20, 2009, 07:57:25 pm »
When I stripped the forks in my 73 380 to fit the new damper rods & top out springs I found 1 fork had the shim facing down/away from the spring & the other with the shim upwards, on this 1 the shim had come adrift but was still able to be refitted to the valve. Am I correct in thinking the shim should be facing away from the spring? I haven't managed to find anything to show the set up in detail
Logged

Ji Gantor

  • Guest
Re: Valve plate in forks
« Reply #1 on: November 27, 2009, 09:44:15 am »
Hi Tony,
Please post an image of the shim.
Please post an image of the dampner rod.


Ji
Logged

Offline tony27

  • Legend
  • *****
  • Posts: 1908
    • View Profile
Re: Valve plate in forks
« Reply #2 on: November 29, 2009, 02:25:34 pm »
The parts are 967-41-135 & 967-41-136 according to the parts book & fit right at the bottom of the fork leg. Will take a photo on the phone to post when I get time, have some work to do to my trials bike for this weekends camping/riding trip first
Logged

Offline tony27

  • Legend
  • *****
  • Posts: 1908
    • View Profile
Re: Valve plate in forks
« Reply #3 on: November 30, 2009, 07:27:29 pm »
url]][/url]<img src="http://i788.photobucket.com/albums/yy166/tony27_photo/Image099.jpg">[<img src="http://i788.photobucket.com/albums/yy166/tony27_photo/Image098.jpg">url][/url]
Top image shows the valve in centre of the photo
Lower image is the new rod from CRHighperformance at the top with the original at the bottom
« Last Edit: November 30, 2009, 07:30:42 pm by tony27 »
Logged
Pages: [1]   Go Up
« previous next »