84 Swingarm Bearing Numbers?

[Husabergpete]

Can anyone tell us the code number for the 4 needle bearings which go in the swingarm pivot of an 84 Husky 250.

Ta

Pete

[PEZBerq]

I used a SKF HK2016-2RS I believe.  Be careful fitting them.  I put them in the freezer and tap them in with a hammer using a socket as a drift.  A little grease in the swing arm helps.  Final installation done using a G clamp to gently push them into the swingarm just far enough so the O-ring seal seats properly.

[Husabergpete]

Many thanks.