Author Topic: IT 400C Intake Joint  (Read 1061 times)

0 Members and 1 Guest are viewing this topic.

two_dogs

  • Guest
IT 400C Intake Joint
« on: August 31, 2009, 08:49:30 pm »
Hi Folks

I'm after the rubber joint between the carb and reed block. It's a round to square.

Yamaha part 510-13555-02. It's also the same one used on MX250/400b and YZ250/400c/d/e

If anyone has one or knows of a wreck or an aftermarket supplier I'd be real appreciative.

Best I've found is one in the states on ebay for $130 ouch ! then up $$$ from there

thanks

Andrew

Offline motomaniac

  • Legend
  • *****
  • Posts: 2448
    • View Profile
Re: IT 400C Intake Joint
« Reply #1 on: August 31, 2009, 09:40:08 pm »
I got two 510's of 400MX they are old but usable ,not cracked.
Can send COD

PM Me

Offline Viper666

  • Legend
  • *****
  • Posts: 841
  • "Yes I bought THAT number plate" so sue me!
    • View Profile
    • Ballarat Rovers MCC
Thank the Lord for Melbourne Bitter, anti-inflamatory drugs & an understanding wife.
YZ80H, YZ100G, YZ125E, YZ125F, YZ125G, YZ250D, YZ250E, YZ250F, YZ250G, YZ250H, YZ400F, IT125G, IT250K & a, a, a,      CRF250X???????    

How the FUG did that sh*tbox Honda get in here?

two_dogs

  • Guest
Re: IT 400C Intake Joint
« Reply #3 on: September 01, 2009, 11:23:50 am »
Thanks Viper

I ordered the one from Boats.net and got a message two days later, not available. I have also emailed the vintagedirt guy, no stock. I will look into the cycle-parts one, it's a -01 not -02, I'll see if I can find out if there is any differnece.

Motomaniac - I'd like to take you up on one of them if possible. I'll pm you some contact details

I raced at Lakes pre78 open for two lasts out of two in Heaven r5. Bike was pinging and overheating by end of the race, otherwise had a top day.

Thanks Guys

Andrew

Offline Husabergpete

  • Legend
  • *****
  • Posts: 561
    • View Profile
Re: IT 400C Intake Joint
« Reply #4 on: September 02, 2009, 07:23:42 pm »
Young 2 Dogs,

                   Flagged for you at Lakes and I felt your pain of a sick bike. It only gets better from here. Contact Mr (Husky Parts) Franco regarding the rubber manifold, Ferando has made some great repros for my bikes. KTM as well has Husky. I'd give him a go...

All the best.

Pete

PS and thanks for the pics. Brilliant
« Last Edit: September 02, 2009, 07:30:20 pm by Husabergpete »
KTM 250 1980,  Maico 250 AW 1977, Husqvarna CR 430 1981, , CZ 250 1973 and a 550 Husaberg

two_dogs

  • Guest
Re: IT 400C Intake Joint
« Reply #5 on: September 03, 2009, 09:35:39 pm »
Thanks for the encouragement Pete. I got 2 off motomaniac today for 50 bucks ... gotta love this forum !

Trying to work out my schedule regarding next few meets. I might try and get to Clarence just to take some photos.
Will definately make the Lake Glenbawn for a race. Still having nightmares from those steep downhills and tabletops at Lakes.

Andrew

Offline matcho mick

  • Legend
  • *****
  • Posts: 2279
    • View Profile
    • Moto Tumbi
Re: IT 400C Intake Joint
« Reply #6 on: September 03, 2009, 10:12:14 pm »
i watched you try the restart on "the" hill Andrew from flaggie point 10,that was painfull enough,but hey from one lucky last to another,at least you  had suspension ;D ;D
work,the curse of the racing class!!
if a hammer dosn't fix it,you have a electrical problem!!