« previous next »
Pages: [1]   Go Down

Author Topic: Spark plug blanking bolt  (Read 1533 times)

0 Members and 1 Guest are viewing this topic.

Offline vmxken

  • B-Grade
  • ***
  • Posts: 298
    • View Profile
Spark plug blanking bolt
« on: December 30, 2008, 10:09:08 am »
Hi - I need one of those special 'bolts' that blanked off a second spark plug hole in the head.  It is for a 1/2" reach plug hole.

Thanks

Ken

Logged

firko

  • Guest
Re: Spark plug blanking bolt
« Reply #1 on: December 30, 2008, 10:28:23 am »
I may have one in an old DT1 head Ken. l'll have a lookie and get back to you.
Logged

Offline frostype400

  • Legend
  • *****
  • Posts: 2496
    • View Profile
Re: Spark plug blanking bolt
« Reply #2 on: December 30, 2008, 12:01:58 pm »
is that like on the some of the suzuki ts's i dont have one but i thought that was for a second plug and acted like an emergency plug if your main one shot itself you could switch the lead and have a fresh plug although that can sometimes look a bit ugly thanks Michael. :)
Logged
1971 tm400 and PE's

Offline LWC82PE

  • Superstar
  • ******
  • Posts: 6006
    • View Profile
    • PE motorcycles & SuzukiTS.com
Re: Spark plug blanking bolt
« Reply #3 on: December 30, 2008, 12:28:37 pm »
14mm bolt with plug washer/copper washer should do the job
Logged
Wanted - 1978 TS185 frame or frame&motor. Frame # TS1852-24007 up to TS1852-39022

Offline Tim754

  • Legend
  • *****
  • Posts: 4011
  • Northern Country Victoria
    • View Profile
Re: Spark plug blanking bolt
« Reply #4 on: December 30, 2008, 12:58:11 pm »
Got a brass one with sealing washer some months back from the local plumbing and gas fitting supplies Ken for $3.
« Last Edit: December 31, 2008, 12:05:53 pm by Tim754 »
Logged
I may not agree with what you have to say, but I'll defend to the death your right to say it.
                                                   Voltaire.

Offline frostype400

  • Legend
  • *****
  • Posts: 2496
    • View Profile
Re: Spark plug blanking bolt
« Reply #5 on: December 30, 2008, 03:13:18 pm »
yeah you could get a brass 1/2 plug you could get a washer anyway and if you want it shorter just cut with a hacksaw is there a reece or tradelink near you probably 3$ for a brass plug they will help with something half inch thanks Michael. :)
Logged
1971 tm400 and PE's
Pages: [1]   Go Up
« previous next »