« previous next »
Pages: [1]   Go Down

Author Topic: WANTED, STD piston to suit RM125M or TM125.  (Read 1698 times)

0 Members and 1 Guest are viewing this topic.

Offline John Orchard

  • Legend
  • *****
  • Posts: 3065
  • ^^^ July 1984
    • View Profile
WANTED, STD piston to suit RM125M or TM125.
« on: October 29, 2022, 10:03:27 am »
Would anyone have a new, or very little use, standard bore (56mm) piston for sale to suit an RM125M or TM125, I have looked at the TS125 pistons but once I shorten the inlet skirt, most of the strengthening rib along the bottom of the skirt is cut away, I want to reduce the chance of cracks appearing.

Needing a piston WITHOUT the exhaust bridge lubricating holes.

Maybe aftermarket (forged?) piston might be different, if are they better in that area I will try one, thanks.

Regards, John.
« Last Edit: October 29, 2022, 10:13:21 am by John Orchard »
Logged
Johnny O - Tahition_Red factory rider.

Offline sleepy

  • Legend
  • *****
  • Posts: 805
    • View Profile
Re: WANTED, STD piston to suit RM125M or TM125.
« Reply #1 on: October 31, 2022, 06:38:14 pm »
Wossner do a TS125 piston which would be more robust than the original and probably by the time you buy new rings clips and pin for a Suzuki piston you will be well on the way to the price of Wossner.
Logged

Offline John Orchard

  • Legend
  • *****
  • Posts: 3065
  • ^^^ July 1984
    • View Profile
Re: WANTED, STD piston to suit RM125M or TM125.
« Reply #2 on: October 31, 2022, 08:26:42 pm »
Good idea, thanks.
Logged
Johnny O - Tahition_Red factory rider.
Pages: [1]   Go Up
« previous next »