« previous next »
Pages: [1]   Go Down

Author Topic: xr500 re electrical testing specs wanted.  (Read 2478 times)

0 Members and 1 Guest are viewing this topic.

Offline ELC hunter

  • B-Grade
  • ***
  • Posts: 270
    • View Profile
xr500 re electrical testing specs wanted.
« on: May 03, 2021, 03:21:16 pm »
Hi  anyone know the test values for 83/84 xr500 for stator, coil, and that transducer on the right side thanks the bike has thrown a chain and cut the wiring even after repair no spark cheers ELC hunter.
Logged

Offline sleepy

  • Legend
  • *****
  • Posts: 805
    • View Profile
Re: xr500 re electrical testing specs wanted.
« Reply #1 on: May 03, 2021, 04:12:29 pm »
I've got a shop manual here for XL400 - 500R, 1982 is the date on the front cover.
AC generator exciter coil is 50-200 Ohms (Black/red wire to ground)and the Pulse generator is 510-570 Ohms (Blue/yellow and Green/white wires)
Logged

Offline ELC hunter

  • B-Grade
  • ***
  • Posts: 270
    • View Profile
Re: xr500 re electrical testing specs wanted.
« Reply #2 on: May 04, 2021, 09:37:37 am »
The problem is that the wires all look black in colour having trouble finding trace colours
Logged

Offline sleepy

  • Legend
  • *****
  • Posts: 805
    • View Profile
Re: xr500 re electrical testing specs wanted.
« Reply #3 on: May 05, 2021, 08:58:19 am »
That can be a problem. The other wires coming out are the Charge coil and the Lamp coil both are listed at 0.2- 1 Ohm. The Charge coil connects to Pink and yellow wires. The Lamp coil is the white/yellow wire and it tests back to ground.
To identify you will need to check between wires and check to ground.
If you PM me an Email address I can send a scan of the wiring diagram with the resistances drawn on.
Logged
Pages: [1]   Go Up
« previous next »