Author Topic: Shed Clearout. Honda, Yamaha, Suzuki and Kwaka parts. UPDATED with more  (Read 5692 times)

0 Members and 1 Guest are viewing this topic.

Offline Krikey

  • C-Grade
  • **
  • Posts: 127
    • View Profile
The wet weather has seen me cleaning up my shed and I've discovered some more items I no longer require.  Years of collecting bits and pieces has me with boxes and boxes of parts that you might need :)  Check it out :)

84 CR250

•   Airbox, incl inlet boot, has a small crack in airbox outer $40
•   Inlet manifold, good condition $30
•   Reed Block, good condition $20

87 CR250

•   Frame and subframe. small modifications by the looks of it but good condition, $50
•   Airbox, including inlet boot, good condition, $50
•   Rear Shock, good condition, $70
•   Tank incl mounts, tap and cap, poor condition $40
•   Shrouds, 2 sets, both usable condition, $30 each set
•   Radiators, original and a bit dented around but still hold water. $20 the pair
•   Clutch cable, good condition $15

89 CR250

•   Air filter cage, good condition, $40
•   Engine gasket kit. USA Winderosa brand. Unused except for the centre case gasket. $40
•   NOS Honda 86-89 Exhaust manifold Seal (part # 18359-ks7-000). Unopened. $15
•   Tank brackets, good cond. $30 pair
•   Plastic shock stone guard (bolts to rear of airbox), some marks, good cond. $35
•   Plastic shock stone guard (bolts to rear of airbox), cracked but repairable. $10
•   Engine clutch cover, not waterpump housing, just clutch cover plate, $20

90 CR250

•   Rear wheel incl disc rotor and sprocket, good condition $80

83 XR350

•   Cylinder head, great condition but no valves. Rare item $150
•   Twin carbs, good condition, $80
•   Airbox, good condition incl inlet rubbers (twin carb), $80
•   Swing arm, good condition $50
•   Rear Shock, good condition $50
•   Pro link linkages, good condition $50
•   Rear Wheel, good condition, $80
•   Rear Brake lever, bolt and rod to brake arm incl adjustors etc, good condition, $40

87 CR125

•   Kick Start Lever, good condition, steel $75
•   CDI, works well $150

89 CR125

•   Brand new ProX con rod kit. Made in Japan. Unopened, $100
•   Kick Start Lever, good condition but some wear in pivot, alloy $60
•   Ignition, works well $150
•   CDI Box, works well $100
•   Coil, works well $40
•   Clutch rod, good cond, $15
•   Water pump gear and impeller, $50
•   Sprocket cover. Good condition, $30
•   Kick start shaft, good condition, $75
•   Crankshaft, usable condition, $100
•   Power valve cover, good cond, $40
•   Gear selector shaft, great condition, $50

83 IT250

•   Set of matching crank cases, good condition, no chain throw damage. $150
•   Cylinder head, good condition, twin plug $50
•   Gear set including gears, selector barrel, shafts etc, GC $100
•   Kick Start Shaft with gear. Excellent condition, $50
•   IT rear tail light from early model. Genuine Yamaha, $80

PE250/400 twin shock

•   Kick starter, course spline one. Fair condition with some wear in shaft, $50
•   Side Stand incl spring and bracket to bolt to frame, good condition $75
•   Genuine Suzuki Headlight (Stanley) and black surround (black are from 81-82 onwards), great condition $75

Other parts
•   YZ400D pipe, good cond, $150
•   KDX400 carby, good cond, $75
•   KDX400 Pipe, good cond, $100
•   YZ125H complete motor including kick starter, ignition etc. Turns over. Has the hard to get clutch basket you want for your 125 G motor ?, splines all good.  $500
•   YZ125G Bottom end, complete including kick starter, ignition etc.  Again, has that hard to get clutch basket.  Turns over, splines good $400
•    YZ250 G/H alloy rear brake lever, good condition, $40
•    YZ250 G/H Standard muffler, good condition, $60
•    YZ250 G/H Ignition.  Complete except coil, looks to have the plug together bits altered to aftermarket plugs,  $150
•    87 YZ80 Radiator shroud. Good condition although been partly painted black at some stage, $30
•   Rotax 125 cc Road Race motor. Type 128. Has new piston. Comes complete with ignition incl programmable CDI box and a coil. Has carbon fibre rotary disc valve. Also includes spare ignition, spare clutch basket, spare inlet manifold etc. Engine manual, Rare $2500
•   RM125 ignition, good condition, $150
•   RM125 CDI box, $100
•   RM125C2 tank, good condition, $100
•   Xl250/350 Motorsport front wheel, incl brake and axle, good cond, $50

MORE PARTS:

•   1979 KX250A5 swingarm, great condition, anodising in excellent condition, only one bush. Rare $250
•   1979 KX125A5 swingarm, great condition, slightly faded anodising, no bushes. rare $200
•   79/80/81 PE175 Alloy swingarm, good condition, $80
•   79/80/81 PE175 rear chain guide, good cond, $40
•   79/80/81 PE175 plastic chain guard, good cond, $40
•   79/80/81 PE175 axle, spacers and drive hub including brakes, good cond, $50
•   NOS TM250 71 – 75 models (also fits TS 250 71 – 81) clutch basket.  No longer available. Were nearly $300 when available, bargain at only $200
•   Tm250 Stator with coils. Good condition, $150
•   NOS RM125/250/370/400/465 front number plate. Still in packet. $50
•   Honda XR600 Forks, good cond, $150
•   Honda XR600 Triple clamps, good cond, $40
•   Honda XR600 front wheel, good cond, $80
•   Honda XR600 airbox, missing one inlet manifold. $40
•   Honda XR250 Cartridge front forks, good cond, $150
•   Honda XR250 triple clamps, good cond, $40
•   Honda XR80 side cover LH side, white, good cond, $40
•   Honda XR80 side cover LH side, white and red, good cond, $40
•   Honda XR80 side cover LH side, red and black, good cond, $40
•   NOS Honda XR80 side cover RH side, white and purple, $75
•   Genuine HDT heads and Crane Roller rockers from ADP VK Calais. Reconditioned $1500
•   Harley Davidson Softail factory exhaust mufflers. Brand new, $200
•   Harley Davidson Pillion seat back support, inches wide?, $50

Can post at your cost of course :)

North Brisbane.
« Last Edit: August 21, 2016, 08:27:26 pm by Krikey »

Offline Glen08

  • B-Grade
  • ***
  • Posts: 203
    • View Profile
Re: Shed Clearout. Honda, Yamaha, Suzuki and even Kwaka parts.
« Reply #1 on: June 19, 2016, 12:08:02 pm »
Hi there.
Interested in the PE parts mate
can I get some pics please ?
zero44876596seven cheers.

Offline relfy

  • B-Grade
  • ***
  • Posts: 175
    • View Profile
Re: Shed Clearout. Honda, Yamaha, Suzuki and even Kwaka parts.
« Reply #2 on: June 19, 2016, 12:16:15 pm »
PM sent IT 250 gear set.

Offline ITDOG

  • C-Grade
  • **
  • Posts: 66
    • View Profile
Re: Shed Clearout. Honda, Yamaha, Suzuki and even Kwaka parts.
« Reply #3 on: August 01, 2016, 08:38:41 am »
PM sent tail light IT 8)

Offline Krikey

  • C-Grade
  • **
  • Posts: 127
    • View Profile
Re: Shed Clearout. Honda, Yamaha, Suzuki and Kwaka parts. UPDATED with more
« Reply #4 on: August 21, 2016, 08:27:06 pm »
Ad updated and some more parts I located in the shed:

•   1979 KX250A5 swingarm, great condition, anodising in excellent condition, only one bush. Rare $250
•   1979 KX125A5 swingarm, great condition, slightly faded anodising, no bushes. rare $200
•   79/80/81 PE175 Alloy swingarm, good condition, $80
•   79/80/81 PE175 rear chain guide, good cond, $40
•   79/80/81 PE175 plastic chain guard, good cond, $40
•   79/80/81 PE175 axle, spacers and drive hub including brakes, good cond, $50
•   NOS TM250 71 – 75 models (also fits TS 250 71 – 81) clutch basket.  No longer available. Were nearly $300 when available, bargain at only $200
•   Tm250 Stator with coils. Good condition, $150
•   NOS RM125/250/370/400/465 front number plate. Still in packet. $50
•   Honda XR600 Forks, good cond, $150
•   Honda XR600 Triple clamps, good cond, $40
•   Honda XR600 front wheel, good cond, $80
•   Honda XR600 airbox, missing one inlet manifold. $40
•   Honda XR250 Cartridge front forks, good cond, $150
•   Honda XR250 triple clamps, good cond, $40
•   Honda XR80 side cover LH side, white, good cond, $40
•   Honda XR80 side cover LH side, white and red, good cond, $40
•   Honda XR80 side cover LH side, red and black, good cond, $40
•   NOS Honda XR80 side cover RH side, white and purple, $75
•   Genuine HDT heads and Crane Roller rockers from ADP VK Calais. Reconditioned $1500
•   Harley Davidson Softail factory exhaust mufflers. Brand new, $200
•   Harley Davidson Pillion seat back support, inches wide?, $50

Offline reg

  • B-Grade
  • ***
  • Posts: 166
    • View Profile
Re: Shed Clearout. Honda, Yamaha, Suzuki and Kwaka parts. UPDATED with more
« Reply #5 on: August 21, 2016, 08:48:36 pm »
PM sent mate, re PE parts

Offline huskibul

  • Legend
  • *****
  • Posts: 824
    • View Profile
Re: Shed Clearout. Honda, Yamaha, Suzuki and Kwaka parts. UPDATED with more
« Reply #6 on: August 21, 2016, 09:55:06 pm »
Pm sent about rm numberplate

Offline LWC82PE

  • Superstar
  • ******
  • Posts: 6006
    • View Profile
    • PE motorcycles & SuzukiTS.com
Re: Shed Clearout. Honda, Yamaha, Suzuki and Kwaka parts. UPDATED with more
« Reply #7 on: August 21, 2016, 10:10:59 pm »
Quote
   79/80/81 PE175 axle, spacers and drive hub including brakes, good cond, $50

is this the 78/79 hub or the 80/81 hub? they are not the same.
I am after the cush drive 80/81 version (brake drum and plate)
Wanted - 1978 TS185 frame or frame&motor. Frame # TS1852-24007 up to TS1852-39022

Offline Krikey

  • C-Grade
  • **
  • Posts: 127
    • View Profile
Re: Shed Clearout. Honda, Yamaha, Suzuki and Kwaka parts. UPDATED with more
« Reply #8 on: August 22, 2016, 08:40:00 am »
Quote
   79/80/81 PE175 axle, spacers and drive hub including brakes, good cond, $50

is this the 78/79 hub or the 80/81 hub? they are not the same.
I am after the cush drive 80/81 version (brake drum and plate)

Message me your email address or phone number and I'll send you some pictures

Offline crs-and-rms

  • Legend
  • *****
  • Posts: 668
  • heaven 23
    • View Profile
Re: Shed Clearout. Honda, Yamaha, Suzuki and Kwaka parts. UPDATED with more
« Reply #9 on: August 23, 2016, 06:52:25 pm »
The rm front number plate what year is it im intersted