« previous next »
Pages: [1]   Go Down

Author Topic: 84wr husky Carby size  (Read 1754 times)

0 Members and 1 Guest are viewing this topic.

Offline hampster

  • B-Grade
  • ***
  • Posts: 204
    • View Profile
84wr husky Carby size
« on: March 01, 2014, 12:16:37 pm »
Hi all,
can anybody in Husky land tell me what size carburettor is on a 1984 wr 250 the parts manual says that it is 36 mm I have a 38 mm on mine.??

Thanks Chris.
Logged

Offline 80-85 husky

  • Legend
  • *****
  • Posts: 3847
    • View Profile
Re: 84wr husky Carby size
« Reply #1 on: March 01, 2014, 12:24:31 pm »
ive flicked it up onto café husky...should get an answer or 6
Logged

Offline HVA61

  • Legend
  • *****
  • Posts: 627
    • View Profile
Re: 84wr husky Carby size
« Reply #2 on: March 01, 2014, 03:11:29 pm »
38mm Mikuni

450main jet

35 pilot (standard as supplied is 45) "watch it with the 35 pilot can be a bit lean at times"

2.0 slide

needle 6F16

needle jet P8

Air screw 1 and 1/4 turns

ours absolutely flys with that jetting

Logged
Autos are the way forward , see you round like a robot
Take the short cut, go Cross Country
The shortest distance between two points is Cross Country
CCM's and HL's bark like mad dogs

Offline HVA61

  • Legend
  • *****
  • Posts: 627
    • View Profile
Re: 84wr husky Carby size
« Reply #3 on: March 01, 2014, 03:13:26 pm »
i forgot to mention , the 38mm is standard on the 84 model 240's and 250's
Logged
Autos are the way forward , see you round like a robot
Take the short cut, go Cross Country
The shortest distance between two points is Cross Country
CCM's and HL's bark like mad dogs

Offline PEZBerq

  • Legend
  • *****
  • Posts: 1094
  • Brisbane
    • View Profile
Re: 84wr husky Carby size
« Reply #4 on: March 01, 2014, 03:54:27 pm »
Hamster the 36mm is for the 125 only. Parts manual is a bit confusing I agree but re read it and you will see the 36 is only against the 125's.

I run the 470 main with a 35 pilot and it goes very well. Might try a 450 and see if it sprouts wings  ;D
« Last Edit: March 08, 2014, 08:20:14 pm by PEZBerq »
Logged
Husqvarnas: 78 390AMX, 82 430XC, 84 240WR, 84 500AE, 84 510TE, 87 510TE

Offline PEZBerq

  • Legend
  • *****
  • Posts: 1094
  • Brisbane
    • View Profile
Re: 84wr husky Carby size
« Reply #5 on: March 01, 2014, 03:57:16 pm »
Should have mentioned I run 3% oil -  32:1 Mixture makes a difference to the jetting.
Logged
Husqvarnas: 78 390AMX, 82 430XC, 84 240WR, 84 500AE, 84 510TE, 87 510TE
Pages: [1]   Go Up
« previous next »