Author Topic: Timing YZ400E (Read 3719 times)

yzhilly · « **on:** August 10, 2007, 02:44:32 pm »

Can someone help me out with the timing checking procedure for YZ400E, I have the spec 2.7mm BTDC. I have a multimeter and dial indicator but i dont have manual on it please help.

Lozza · « **Reply #1 on:** August 10, 2007, 07:23:14 pm »

Does the engine have the internal rotor/ external stator? If yes should have 3 lines on the stator, the mark on the rotor should line up with the longest line on the stator at 2.7mm BTDC.I have done this many a time on a YZ 80 ignition always works out right.The internal stator/external flywheel type usualy has 2 marks on the flywheel at TDC the second mark usualy is smack bang underneath the trigger.
HTH

yzhilly · « **Reply #2 on:** August 10, 2007, 10:06:27 pm »

Thanks Lozza it's external flywheel, I will check it in the morning .It's getting closer to how it should go its still running rich but i will try adjusting the needle clip tomorrow

YZ250H · « **Reply #3 on:** August 12, 2007, 05:41:56 pm »

As per 400E post I will scan some pages of the manual and email to you.

Cheers

YZ250H · « **Reply #4 on:** August 13, 2007, 08:58:45 am »

Check your emails Hilly - there should be a few scanned pages in there

yzhilly · « **Reply #5 on:** August 13, 2007, 10:09:37 am »

Got it thanks Tony.

OzVMX Forum

Author Topic: Timing YZ400E (Read 3719 times)

yzhilly

Timing YZ400E

Lozza

Re: Timing YZ400E

yzhilly

Re: Timing YZ400E

YZ250H

Re: Timing YZ400E

YZ250H

Re: Timing YZ400E

yzhilly

Re: Timing YZ400E