Yamaha sprockets

[steve7406]

Rear sprockets for a 74 mx 250 where can you get them.

[Nathan S]

I bought mine from John Titman.
I don't know of any "off the shelf" option.

[Andrew L]

I think these are the same bolt pattern but only go up to 49 teeth they fit several other models as well search the site a bit more you might find what you need.

http://www.jtsprockets.com/catalogue/model/6330

[Nathan S]

I'm pretty sure the IT125 used the early YZ125-IT175 bolt pattern, which is different to the MX250 pattern.

If my memory serves me, the MX250/360 and SC500 are the only ones to use that particular sprocket.

[Iain Cameron]

Might be wrong , but I think DT2MX and RT2MX use it same as well . Iain

[oldfart]

PBI Australia..... 

[steve7406]

Thanks guys will ring PBI will also ring john titman again last phone call I made was told don't do em.

[Davey Crocket]

You need to talk to John, they have blanks and a wall full of all types of sprockets which he can re-drill the center to suit. Titty keeps a "book" with all of the measurements in it...old school but it works. If he hasn't got it on file, send him your old one so he can copy it.

[Iain Cameron]

John makes them , only speak to John the others are good for more modern stuff but John is the brains with sprockets . He's made 2 or 3 for me over the years . Iain

[Nathan S]

I got some random young bloke when I rang (definitely not John) and had no hassles?!

[oldfart]

PBI have them in stock    7054 -51