« previous next »
Pages: [1]   Go Down

Author Topic: Ktm rear hub - not vintage  (Read 1342 times)

0 Members and 1 Guest are viewing this topic.

mainline

  • Guest
Ktm rear hub - not vintage
« on: January 29, 2012, 07:29:28 pm »
Looking for a rear hub to suit a 97 ktm300. I think the hub was the same for all capacities though
Logged

Offline YZ250H

  • Legend
  • *****
  • Posts: 2116
  • Back in QLD Baby !
    • View Profile
Re: Ktm rear hub - not vintage
« Reply #1 on: January 29, 2012, 07:56:47 pm »
What's wrong with the one you got ??
Logged
Looking for YZ250C parts NOS if possible

"My inability to use emoticins in the right context is really getting me down :)
Quote from: GMC on May 03, 2014, 10:35:22 am
The only triple jumps he would have been doing are the hop, skip & jump.

mainline

  • Guest
Re: Ktm rear hub - not vintage
« Reply #2 on: January 29, 2012, 08:01:01 pm »
looks like Hannibal Lecter has been let loose in there with a dremel.

I knew it wasn't going to be good when the bearing and seal fell out with the spacer ;D
Logged

Offline Davey Crocket

  • Legend
  • *****
  • Posts: 4408
    • View Profile
Re: Ktm rear hub - not vintage
« Reply #3 on: January 29, 2012, 08:06:37 pm »
Believe it or not, I have a NOS front one. ;D
Logged
QVMX.....Australia's #1 VMX club......leading the way.

Offline YZ250H

  • Legend
  • *****
  • Posts: 2116
  • Back in QLD Baby !
    • View Profile
Re: Ktm rear hub - not vintage
« Reply #4 on: January 29, 2012, 08:09:11 pm »
The way the back one is Davey he may be needing the front one as well  ;D ;D ;D
Obviously you have checked ebay  ::)
Logged
Looking for YZ250C parts NOS if possible

"My inability to use emoticins in the right context is really getting me down :)
Quote from: GMC on May 03, 2014, 10:35:22 am
The only triple jumps he would have been doing are the hop, skip & jump.

oldfart

  • Guest
Re: Ktm rear hub - not vintage
« Reply #5 on: January 29, 2012, 08:13:11 pm »
 Paul , though about using a speedi sleeve.   
Logged

mainline

  • Guest
Re: Ktm rear hub - not vintage
« Reply #6 on: January 29, 2012, 08:16:28 pm »
Quote from: oldfart on January 29, 2012, 08:13:11 pm
Paul , though about using a speedi sleeve.   

I did, but it's pretty flogged out in there, probably too much for a speedi-sleeve. If I can't find a hub I might have to get it bored out and have a sleeve made up.
Logged

Tony T

  • Guest
Re: Ktm rear hub - not vintage
« Reply #7 on: January 29, 2012, 08:19:20 pm »
Apparently, that's quite common problem with that era KTM's.
So you might struggle to find a good S/H one.  :-\
Logged

mainline

  • Guest
Re: Ktm rear hub - not vintage
« Reply #8 on: January 29, 2012, 08:22:27 pm »
Quote from: Tony T on January 29, 2012, 08:19:20 pm
Apparently, that's quite common problem with that era KTM's.
So you might struggle to find a good S/H one.  :-\

I've heard the same, might be a trip to the machinist
Logged

Offline vandy010

  • Legend
  • *****
  • Posts: 1982
  • #789 MX125a BMCC Brisbane
    • View Profile
Re: Ktm rear hub - not vintage
« Reply #9 on: January 29, 2012, 08:28:52 pm »
i was going to suggest you get the bearing "built up" with a copper coating.
but if it's too flogged for a speedi sleeve, then ???
Logged
"flat bickie"

Offline SLAWESY

  • B-Grade
  • ***
  • Posts: 264
    • View Profile
Re: Ktm rear hub - not vintage
« Reply #10 on: January 29, 2012, 09:24:22 pm »
Quote
Believe it or not, I have a NOS front one.

CLASSIC!!
Logged
YZ125E, RM250T

Quote
Is it way too small? A bit of work with the heat gun or hot water could soften it enough to fit if it's close. Maybe some rubber friendly grease as well.
Mainline "classic"

mainline

  • Guest
Re: Ktm rear hub - not vintage
« Reply #11 on: January 29, 2012, 09:57:37 pm »
Turd!
Logged

Offline ian

  • C-Grade
  • **
  • Posts: 96
    • View Profile
Re: Ktm rear hub - not vintage
« Reply #12 on: January 30, 2012, 08:31:18 pm »
there is a 99 ktm rolling chassie ebay  120852059221 if its any help
Logged

Offline ola_martin

  • Legend
  • *****
  • Posts: 509
    • View Profile
Re: Ktm rear hub - not vintage
« Reply #13 on: January 30, 2012, 09:38:54 pm »
Quote from: Tony T on January 29, 2012, 08:19:20 pm
Apparently, that's quite common problem with that era KTM's.
So you might struggle to find a good S/H one.  :-\

And usually happens because the chain is too tight.
Logged
Pages: [1]   Go Up
« previous next »