« previous next »
Pages: [1]   Go Down

Author Topic: rm250 T springs  (Read 1868 times)

0 Members and 1 Guest are viewing this topic.

Offline crabO

  • Novice
  • *
  • Posts: 24
    • View Profile
rm250 T springs
« on: September 20, 2010, 05:40:09 pm »
I have a tarted up RM250 T which I ride regularly on a "natural" type track. It has stock shocks that damp OK but the springs are pathetically soft for 95 k ride weight. Does anyone know a commonly available ( wrecker ) spring that will fit. Spring length on shock is 165 mm , ID 50mm. I am thinking something like CR80 prolink springs. Need to get to a wrecker with a tape measure and calliper.
Logged

Offline rocketfrog

  • Legend
  • *****
  • Posts: 562
    • View Profile
Re: rm250 T springs
« Reply #1 on: September 21, 2010, 03:35:01 pm »
what about RM/PE 400 Springs?
Logged
Political correctness is a doctrine,fostered by journalists and politicians, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end."

Offline LWC82PE

  • Superstar
  • ******
  • Posts: 6006
    • View Profile
    • PE motorcycles & SuzukiTS.com
Re: rm250 T springs
« Reply #2 on: September 21, 2010, 04:13:13 pm »
PE springs will definitely be too soft for a 95 kg rider. I have some WP dual springs but they would be too hard i reckon as they have really thick wire, plus they are not progressive. From memory they are 280mm long which i reckon is probably too long for dual spring set up but i would have to check.
Logged
Wanted - 1978 TS185 frame or frame&motor. Frame # TS1852-24007 up to TS1852-39022

Offline crabO

  • Novice
  • *
  • Posts: 24
    • View Profile
Re: rm250 T springs
« Reply #3 on: September 21, 2010, 05:24:13 pm »
I am delusional , spring length is 264 mm of course.
Logged

Offline LWC82PE

  • Superstar
  • ******
  • Posts: 6006
    • View Profile
    • PE motorcycles & SuzukiTS.com
Re: rm250 T springs
« Reply #4 on: September 21, 2010, 05:46:42 pm »
Yeah my WP springs will be too long for you anyway then. If you want to go the wrecker option look at RM80, KX 60, KX80 shocks. theres tonnes of those around and they might work.
Logged
Wanted - 1978 TS185 frame or frame&motor. Frame # TS1852-24007 up to TS1852-39022

Offline crabO

  • Novice
  • *
  • Posts: 24
    • View Profile
Re: rm250 T springs
« Reply #5 on: September 22, 2010, 01:39:36 pm »
wow - thats a lot of springs , how do I know the rate? - is it relative to wire thickness? Any body know the rates of 1980 rm250 rear springs? -I have no manual.
Logged
Pages: [1]   Go Up
« previous next »