YZ125G clutch basket

[Woody]

Guys
Still looking for a good YZ125G (3R3) clutch basket (62 teeth on drive)

looks like YZ100 J and k may be the same

and any other good 125G spares you may have to offload.

cheers
Woody

1983 CR250RD parts / parts bike also wanted any condition considered

[Freakshow]

i might have one, i know there is a few bottom ends down  there either 3R1 0r 3R3 or 1R8 - i have at least one of those numbers im sure right    ,  will check next time im down the farm,

[Woody]

that'd be great freaky. from what I can tell this clutch basket only ran across those three particular models.
cheers

[ELC hunter]

Does any one know if it 175 g is the same have one of those .

[Woody]

thanks but from what I can see they have a different part no. and no. of teeth

[Freakshow]

OK the one i have is in a 1R8, but has stamped 1m1 on the clutch cover plate itself, with  cut outs on the hub finger and angled mesh mesh ring.

if i had a camera i would have taken a photo, also stood on my fone and it filled with water, amoung other disarters on the weeknd so i have nothing to show you :'(

[Woody]

thanks for looking Freaky, sounds like you had an interesting weekend.

the basket for the 125G is stamped 1W1 (like alot of others) byt has 62 teeth. I think the boss might be stamped 1G8. I can try and post a pic of one later on.

[Freakshow]

So what are you asking me ? to count the teeth on the primary ring ?

[Woody]

that's a lot of teeth to count.  if it's not stamped 1W1 then it's probably not the right one. here's a pic

[Freakshow]

Where excatly is it stamped 1w1 ?