This is just a reminder to all servicing their bikes for CD 7 especially those with multiple bikes.
It is easy to get distracted while changing the oil.
So double check that you definitely
Put oil in the gear box,
Took the rag out of the air box before you installed the air filter,
Torqued up the axles and swingarm pivot bolts,
Pumped up the tyres,
Tightened the chain,
Torqued up the triple clamps,
Turn the fuel tap to off,
Torqued up the cylinder and head bolts,
Topped up the fork oil,
Adjusted the brakes,
Foot peg return springs work,
Handle bar ends are plugged,
Throttle returns to idle by spring,
Steering head bearings are tight,
Intake manifold is tight without air leaks,
Locktited all nuts and bolts and
installed the springs on that new muffler
If not done this stuff could ruin your whole time at CD so take the time and go over it again.
Good luck and tight nuts
Ji