Messages

1

Wanted / Re: 84 Husqvarna Rod Kit

« on: September 26, 2018, 11:57:33 am »

Hi,

Thanks went with the HVA 5 days in my hand.

Chris.

2

Wanted / 84 Husqvarna Rod Kit

« on: September 18, 2018, 10:51:28 am »

Hi All,

After a rod Kit for a 84 Husqvarna wr 250 air cooled.

Thanks Chris.

3

Wanted / Honda xr 250r 86 to 95

« on: August 20, 2018, 09:14:17 am »

Hi,

After full exhaust system for xr 250r 85 to 95 xr's only, staintune ? or any sports exhaust.

Thanks chris

4

Wanted / Honda xr 600 forks

« on: August 16, 2018, 07:46:49 am »

Hi

After set xr 600 forks and triples 1991 onward the cartridge set up.

Thanks Chris.

5

Bike Talk / Re: xr eligibility

« on: April 18, 2018, 11:29:37 am »

 what i meant to say.

Stupid question Wednesday, are the 87,88,89 Honda xr 250 classed as a follow on model of the 86 as they are the same bike and are pre 87???

Thanks Chris.

6

Bike Talk / xr eligibility

« on: April 18, 2018, 08:53:59 am »

Hi all,

Stupid question Wednesday, are the 87,88,89 Honda xr 250 classed as a follow on model of the 86 and are legal for pre 87???

Thanks Chris.

7

Wanted / 1986 Honda xr 250

« on: April 17, 2018, 02:02:21 pm »

Hi All,

After a xr 250 1986,87,88 or 89 can pay cash or swap for a fully sorted motosport xl 350 (402cc) set up for flat track.

Thanks Chris

8

Husqvarna / 1984 cr rear wheel

« on: February 09, 2018, 04:02:21 pm »

Hi all,

Had a stuff up and got a cr wheel respoked in stainless and gold excel and powder coated.

cost $600 want close to the same or i will delaced and use on the wr hub.

Thanks Chris.

9

Husqvarna / 1980 front wheel off set

« on: January 23, 2018, 06:24:02 am »

Hi,

Does any body know the front wheel off set for a 1980 Husqvarna wr 250 ?

Thanks Chris

10

Wanted / Husky 1980 wr 250 front wheel.

« on: May 02, 2017, 07:29:21 am »

Hi All,

After a 1980 husky front wheel can swap for a 78/79 husky front wheel in great condition.

Thanks Chris

11

Wanted / Re: Ohlins internal bits.

« on: January 27, 2017, 08:51:26 am »

Thanks K,

Tried Ohlins they do not have the pistons for the older shocks, still on the hunt.

Thanks Chris.

12

Wanted / Ohlins internal bits.

« on: January 23, 2017, 11:42:57 am »

Hi All,

After pistons for remote reservoir Ohlins off a 1980 WR Husky, or a set of shocks that can be rebuilt.

Thanks Chris.

13

Husqvarna / Paul Rooney sticker

« on: January 17, 2017, 02:21:38 pm »

Hi all in Husky land,

I know this is going to sound sound odd by what I am chasing up is a old Paul Rooney motorcycle sticker just trying give my 1980 wr a period look with a few stickers would anyone have a sticker I can  copy (I did have a couple but I cannot find them anywhere) its only been 37 years must be some left.

Thanks Chris.

14

Wanted / Honda XL 350 pre 75

« on: December 21, 2016, 02:11:57 pm »

Hi all,

Would any body have a set of performance shocks for a Honda xl 350 for sale?

Thanks Chris.

15

Wanted / Re: conrod 1980 husqvarna

« on: September 20, 2016, 06:51:43 am »

Hi All,

Thanks for the advice the rod is still in the bottom end and has no movement at all the  issue I have is when I turned over the  crank after taking the barrel off I notice fine bits of grit or sand coming up from the bottom end.

I washed it out about five times with petrol trying to get all the fine grit out but it still keeps  coming up from the bottom end, so I believe I will now have to split the cases, I was going to put new main bearings and seals in and I thought I would replace the rod when I had it apart but what will do now is check the rod and only replace if necessary.

Thanks for all your advice.