1
Suzuki / Re: 1975 RM125S Parts
« on: March 01, 2018, 11:17:00 pm »
Tahnks guys!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1] 2
2
Suzuki / 1975 RM125S Parts
« on: February 23, 2018, 11:11:07 pm »
I'm looking for parts for a 1975 RM125S.
I had a chance a while back to buy a frame and tank and really regret not buying it.
please let me know what you have and what you want for it!
Thanks
I had a chance a while back to buy a frame and tank and really regret not buying it.
please let me know what you have and what you want for it!
Thanks
3
For Sale / Brand New PVL Ignition for 1974/75 YZ MX125
« on: February 15, 2018, 10:37:26 pm »
Brand New Never Used PVL Ignition for 1974/75 YZ MX125. I purchased this for a project that I'm Sadly not going to go through with. Asking what I paid for it $520 US.
Will be parting a 1974 YZ125A soon too!
Will be parting a 1974 YZ125A soon too!
5
Suzuki / 1975 RM125S vs M Pistons
« on: December 02, 2017, 04:54:43 am »
Can someone post the part numbers of Suzuki Pistons and Rings for the '75 RM125S Model Please.
I can only find Part numbers for the M model.
I have a stock piston here that has thinner rings and I'm wondering if the S model came that way.
I can only find Part numbers for the M model.
I have a stock piston here that has thinner rings and I'm wondering if the S model came that way.
6
For Sale / 1978 KX125 A4, 1979 KX125 A5, 1979 KX250 A5
« on: September 28, 2017, 02:32:54 am »
1978 KX125 A4, 1979 KX125 A5, 1979 KX250 A5
Was going to restore these but I’m slowing starting to realize that I won’t have time.
Would like to sell them as a Lot for basically what I have in them.
Asking $6000 US For the lot.
Willing to Ship WorldWide if you set everything up.
Can disassemble and Ship for a tiny fee.
Was going to restore these but I’m slowing starting to realize that I won’t have time.
Would like to sell them as a Lot for basically what I have in them.
Asking $6000 US For the lot.
Willing to Ship WorldWide if you set everything up.
Can disassemble and Ship for a tiny fee.
8
Suzuki / Re: 1975 RM125M
« on: November 18, 2016, 04:30:10 am »
I live in Canada And I'm not sure the S Model ever made it here.
This is Definitely an M Model with the 28mm Carb.
It looks like a very low hour bike.
Would post a pic if I could figure out how.
This is Definitely an M Model with the 28mm Carb.
It looks like a very low hour bike.
Would post a pic if I could figure out how.
9
Suzuki / 1975 RM125M
« on: November 17, 2016, 07:52:21 am »
I have just bought a 1975 RM125M and would like to know what it would take to convert it to a “S” model?
Is the Hop-Up kit that was available back in the day pretty much the same as what a “S” would have been?
Does anyone have any Hop-Up Parts or “S” parts that they would be willing to sell?
Is the Hop-Up kit that was available back in the day pretty much the same as what a “S” would have been?
Does anyone have any Hop-Up Parts or “S” parts that they would be willing to sell?
10
For Sale / Re: 1975 RH250 Suzuki For Sale
« on: November 02, 2016, 03:29:56 am »
Very NICE!!
Anyone Buy this or is it still for sale??
Anyone Buy this or is it still for sale??
11
For Sale / Parting a 1973 CR250
« on: September 07, 2016, 09:04:15 pm »
Parting out a 1973 CR250M
I bought it to build a racer from and have decided to go a different route
The frame looks real good I can’t see any cracks or repair work
The engine turns over and is not seized Does have some epoxy on the top by the clutch cover.
Forks are real nice with no rust and don’t appear to be leaking.
Swing-Arm is aftermarket have no idea which brand possibly red Line??
Wheels have rusty spokes
Gas tank is steel not aluminum and has been painted. Doesn’t look to bad on the inside.
I really have no knowledge on the honda stuff as mostly I play with Suzuki’s but will help answering any questions or sending more pics.
Prices below in US Plus Shipping. Will Ship World Wide
Frame $150
Carb $50
Engine $550
Forks $200
Swing Arm $200
Shocks $150
Tripple Clamps $75
Front Wheel $75
Rear Wheel $100
Rear Axle $50
Rear Brake system $75
Inner rear Fender $50
Front Fender $40
Gas Tank $200
I bought it to build a racer from and have decided to go a different route
The frame looks real good I can’t see any cracks or repair work
The engine turns over and is not seized Does have some epoxy on the top by the clutch cover.
Forks are real nice with no rust and don’t appear to be leaking.
Swing-Arm is aftermarket have no idea which brand possibly red Line??
Wheels have rusty spokes
Gas tank is steel not aluminum and has been painted. Doesn’t look to bad on the inside.
I really have no knowledge on the honda stuff as mostly I play with Suzuki’s but will help answering any questions or sending more pics.
Prices below in US Plus Shipping. Will Ship World Wide
Frame $150
Carb $50
Engine $550
Forks $200
Swing Arm $200
Shocks $150
Tripple Clamps $75
Front Wheel $75
Rear Wheel $100
Rear Axle $50
Rear Brake system $75
Inner rear Fender $50
Front Fender $40
Gas Tank $200
12
For Sale / Re: Magazines for sale - VMX, Classic Dirtbike, some 90s ADBs
« on: March 30, 2016, 03:12:25 am »
Sent you PM for VMX Mags
13
Introductions / Re: From The Great White North Eh!
« on: November 19, 2015, 04:14:26 am »Yeah welcome aboard Phil.
Beautiful country.
Two of my ancestors from there, one from the east and one from the west.
Where are you from?
I Live in Ontario Very close to Toronto. VMX racing is small here but growing.
14
Suzuki / RM250C and C2 Fork set up
« on: June 23, 2015, 02:33:20 am »
I have a RM250C2 that I'm setting up for vintage MX.
I have both C and C2 forks and would prefer to use the C forks since I'm pretty short and would like the bike a little lower.
What are you guys doing with the internal set up for these forks
RaceTech has stiffer springs that don't require air but do you still use all the top out springs?
I have both C and C2 forks and would prefer to use the C forks since I'm pretty short and would like the bike a little lower.
What are you guys doing with the internal set up for these forks
RaceTech has stiffer springs that don't require air but do you still use all the top out springs?
15
For Sale / Re: 1981 Honda CR450R fully restored and for sale.
« on: May 28, 2015, 03:01:10 am »Who was Elsinore?
More like Where is Elsinore?
Lake Elsinore, California
Pages: [1] 2