Messages

1

Tech Talk / Re: Has anyone ever welded a piston, and used it?

« on: March 01, 2023, 03:38:35 PM »

Might be off subject but I remember Nathan putting a hole in his piston at Glenbawn, installed a round head bolt and finished the meeting!

2

General Discussion / Re: someone fresh my memory, there was a really nice RM125S in US pictured on here

« on: March 04, 2014, 09:14:35 PM »

Jeeez, a TM250 Brett! hope your dirt tracking it. Still got the RMS i sold you?

Nifty

3

Bike Transport / Re: Tassie to Melb 17th

« on: August 06, 2013, 07:48:29 AM »

Where you off to Ian?

4

Competition / Re: 2013 Sydney Dirt Track Championship

« on: January 29, 2013, 09:24:59 PM »

Donno's got a couple in the pipeline but he can borrow one of mine again so long as he comes around and washes it from last time!
Be good to see the Husky Snowy, send me a PM would like to talk about the 450 clutch.

Nifty

5

Competition / Re: 2013 Sydney Dirt Track Championship

« on: January 29, 2013, 08:17:33 PM »

If we can get a sponsor for Wally we should be able to keep his RT1 on the track and that will be 6! I have another 2 pre 70's ready to go so if Donno hasn't finished his project he's in, I'm sure i"ve another rider lined up,  8 ?

Nifty

6

Competition / Re: Heaven - CRC meeting 14/15 July

« on: July 16, 2012, 08:53:03 PM »

Fantastic weekend, good to catch up with a lot of people I havn't seen for awhile, must get there earlier so i don't get to bed last! Unfortunately had to head off early, must have been the weekend for ankles! Results back today for Reece, fractured ankle, off work and off the bike for awhile.

Nifty

7

Competition / Re: Sydney West round TWO

« on: May 30, 2012, 09:45:02 AM »

Shall see you there 16th & 17th June, 2 day format now, practice sat morning & 1st race Sat arvo, 2 races Sunday looking forward to it! Don't know about camping but, bit bloody cold!

Nifty.

8

Wanted / Re: engine rebuild

« on: May 07, 2012, 08:43:12 PM »

Pat, let me know if you track down a rod kit, trying to get mine ready for DT as well.

9

Wanted / Re: Maico Swingarm Pivot Bolt

« on: May 07, 2012, 08:40:10 PM »

Try Les at VMXUnlimited. http://www.vmxunlimited.com/

10

Wanted / Honda CR250M crank rod

« on: April 28, 2012, 08:42:05 AM »

Chasing a replacement crank rod for my 74 CR250. I believe PROX had a rod that was 1mm longer (part 03-6642) but this is no longer available. Do have a 3mm alum. spacer but not sure which rod to buy that will match, anybody undertaken this mod.? Does anyone have a spare crank or rod?
Nifty

11

Competition / Re: VMX race number listing

« on: April 16, 2012, 07:45:10 PM »

8       James Lee
9       Holeshot Buddy
10     Albert Iskra
11W  Mudguard
17     Steve W (currently Viper 32)
18     Tm Bill
19     Slawesy
25     Mick G
27     Gettinold
32     Hoony
33     Ribbo
34     Rossco
36     Mick De
37     Head
45     Mike Gordon (VMXWA)
50     Billet YZ
50     Supersenior 50
50     Steven WA
52     Freakshow
54     Iain Cameron
54     Canam370
57     Firko
61     John  Orchard  (Vic only)
63     Craig Simpson
69     Michael Bamford
70     Andy Marshall
70     Woody
76     Snowy/Birko
79     Viper79  (Rob Cain)
80     Noel
83     Bernie
89     Shaun Pratt
090   Brad van Barrelo
101   Tex
118   Jonesy
136   Graeme M
146   Steven G
162   GWC
169   Barry (tossa) WA
173   Neville Shepheard
198   Curly (brett Lockhart)
211   Dave Tanner
222   Ken Swan
247   Ben WA
297   Shaun Gallaway (HEAVEN #27)
305   Asasin, Buzzard
500   Brent J
509   IT400C
555   Dennis M
674   dkupf
754   Tim754   Pre75 Sidecars
789   Vandy
818   Nathan S
969   Lisa Fox
999   Brian Fox
 
 

 

12

Vintage Track / Re: Sydney West Dirt track Series.

« on: April 02, 2012, 07:36:08 PM »

Will be there Pancho, looking forward to finally having a ride, may even hit practice on the Saturday. Hope your bringing the RT1 I'm hopin to have the Maico ready for Pre 70. Terry tells me he's coming down and Brett Dono's joining in on my old RM.

Nifty.

13

Yamaha / Re: Pic of my DT1

« on: January 16, 2012, 06:56:49 PM »

Firko, is that one of them fancy oil coolers i can see poking out of the side case, do they work?

14

Wanted / Re: Honda CR125M crank seal source

« on: January 15, 2012, 10:03:59 AM »

Shaun, Magoo supplied my last one as well, good thought, I'll try Les when he returns from holidays. Cheers.

15

Wanted / Re: Honda CR125M crank seal source

« on: January 13, 2012, 07:22:14 AM »

Thanks Noel & Lozza, I'll try Craig as I'll have to take the crank to him at any rate, snapped the pin in half at Buladelah, not sure why there was no heat stress evident!