OzVMX Forum

Marketplace => Wanted => Topic started by: shorelinemc on November 20, 2016, 07:42:35 pm

Title: rm370
Post by: shorelinemc on November 20, 2016, 07:42:35 pm

looking for a kickstart lever and  airbox complete for a rm370

Title: Re: rm370
Post by: Rossvickicampbell on November 20, 2016, 11:00:53 pm

I believe airboxes are rare as - but also heard a rumour GMC was making them?????

Title: Re: rm370
Post by: Oldfart on November 26, 2016, 09:54:24 pm

Robin ... Vintage Suzuki Sell replica Fibre glass ones, you will need to have all the brackets etc as its a shell only

Title: Re: rm370
Post by: shelpi on November 27, 2016, 11:31:50 am

are you ok with bending up sheet aluminium, it took me ages but I finally got one from the USA they are a scarce on the ground but still out there! good luck
I will keep an eye out as I am still looking for RM370 parts for my slow but getting there build
cheers

Title: Re: rm370
Post by: KTM47 on November 27, 2016, 12:12:07 pm

Quote from: Rossvickicampbell on November 20, 2016, 11:00:53 pm

I believe airboxes are rare as - but also heard a rumour GMC was making them?????

I believe Geoff GMC was going to make some airboxes.  I have also seen others on the internet.

Ok kickstarters, the early RM370As had a smaller shaft that would brake.  The next one that was used on later As and then the B and C model are very rare. They would also break at the clamp.

However you can occasionally get a N or T kickstart.  They bolt on differently, the bolt is into the shaft on the end.

Has anyone compared the B and T shafts to see if they would interchange?

Title: Re: rm370
Post by: Oldfart on November 27, 2016, 06:24:05 pm

Yes I  have .
same spline = coarse
N/T are longer with a different bend ( not much )
N/T can be easily adpt to make them work on B/C  coarse splines

Title: Re: rm370
Post by: shorelinemc on December 01, 2016, 11:22:48 pm

found