OzVMX Forum

Marque Remarks => Suzuki => Topic started by: shelpi on March 26, 2014, 02:01:16 pm

Title: RM250X
Post by: shelpi on March 26, 2014, 02:01:16 pm
where is the best place to source a RM250X 1981 inlet manifold rubber or as the Yanks like to call them reed valve rubber. cheers
Title: Re: RM250X
Post by: Tossa on March 26, 2014, 04:40:21 pm
you'll be lucky to find a new one.  Did I tell you I finished mine

(http://i728.photobucket.com/albums/ww283/bmitches/1925278_10203480612645082_99709435_n_zps8778cdc9.jpg) (http://s728.photobucket.com/user/bmitches/media/1925278_10203480612645082_99709435_n_zps8778cdc9.jpg.html)
(http://i728.photobucket.com/albums/ww283/bmitches/1507933_10203480612805086_617038040_n_zps1d25113e.jpg) (http://s728.photobucket.com/user/bmitches/media/1507933_10203480612805086_617038040_n_zps1d25113e.jpg.html)

Barry
Title: Re: RM250X
Post by: Brian Watson on March 26, 2014, 05:30:52 pm
The best way around it is to make an aluminium plate that fits the reed block (sqaure) and get a Mikuni rubber adaptor that has the two bolt hole arrangement, like Husqvarna used up until about 83..
Title: Re: RM250X
Post by: shelpi on March 27, 2014, 03:23:20 pm
Quote from: Tossa on March 26, 2014, 04:40:21 pm
you'll be lucky to find a new one.  Did I tell you I finished mine

(http://i728.photobucket.com/albums/ww283/bmitches/1925278_10203480612645082_99709435_n_zps8778cdc9.jpg) (http://s728.photobucket.com/user/bmitches/media/1925278_10203480612645082_99709435_n_zps8778cdc9.jpg.html)
(http://i728.photobucket.com/albums/ww283/bmitches/1507933_10203480612805086_617038040_n_zps1d25113e.jpg) (http://s728.photobucket.com/user/bmitches/media/1507933_10203480612805086_617038040_n_zps1d25113e.jpg.html)

Barry
Good stuff, looks like its ready to race ;)
Title: Re: RM250X
Post by: shelpi on March 27, 2014, 03:24:47 pm
Quote from: Watto HVA 1 on March 26, 2014, 05:30:52 pm
The best way around it is to make an aluminium plate that fits the reed block (sqaure) and get a Mikuni rubber adaptor that has the two bolt hole arrangement, like Husqvarna used up until about 83..
Cheers Mate, that is a good idea ;) :)
Title: Re: RM250X
Post by: flyingdg on March 29, 2014, 04:51:08 pm
I think hot foot moto in the US has them.
Title: Re: RM250X
Post by: shelpi on March 30, 2014, 12:08:27 pm
Quote from: flyingdg on March 29, 2014, 04:51:08 pm
I think hot foot moto in the US has them.

thanx mate, ;) cheers