OzVMX Forum

Clubroom => Stolen! => Topic started by: mitcho on February 28, 2013, 01:35:42 pm

Title: Stolen CAN-AM 1974 TNT 250, Victoria point Qld
Post by: mitcho on February 28, 2013, 01:35:42 pm
Looking for any leads...My 1974 CAN-AM 250 TNT was stolen 5 days ago from home shed.
Was race prepped 27M. with enduro gear removed. last competed in QlD classic titiles Harrisville 2012.

Distinctive features: 1. non original chain guide(home made) ,  2.small tear in side of seat (repaired heat weld) 3. Fork brace, original trellebourg front knobby (only because rim lock is seized) 4. new progessive rear shocks 5. Steering head bearings are RS 6. MX3  orange foot pegs 7. all new plastics with decal kit 8.tank mounting bracket  non original 9. oil injector in place. 10.  New feul petcock
this is the obvious stuff, but there are other indicators.....

Can anyone help with advice regarding  recovery ?  More than happy  to offer a reward 
thanks for looking   :'(
  Mitch  0417636578
Title: Re: Stolen CAN-AM 1974 TNT 250, Victoria point Qld
Post by: VMX247 on February 28, 2013, 07:16:51 pm
yes its enough to make ya cry..
Youve been working on that for two years. !
Best wishs for getting her back in your shed.

(http://i146.photobucket.com/albums/r259/vmx247/security_zps8743bf0e.jpg)
Title: Re: Stolen CAN-AM 1974 TNT 250, Victoria point Qld
Post by: FireKwaka on February 28, 2013, 08:59:39 pm
I feel for you Mitch, I had one of those Can Am's fantastic bike. Scumbag bastards, i will remember to keep an eye out for those features for years to come. hope it gets safely back to you soon.
Title: Re: Stolen CAN-AM 1974 TNT 250, Victoria point Qld
Post by: 09.0 on February 28, 2013, 10:06:19 pm
The fact it's a 74 Can Am is enough of a distinctive feature. I will have my eyes peeled.
Title: Re: Stolen CAN-AM 1974 TNT 250, Victoria point Qld
Post by: Rookie#1 on February 28, 2013, 10:12:35 pm
FLUCKIN DIRTY STINKIN JOBLESS PATHETIC COCKSMOKIN ASSCLOWNS!!! I HOPE THAT YOU ARE PERSONALLY LUCKY ENOUGH TO COME ACROSS THE FILTHY CARNTS YOURSELF, I WOULD SUGGEST YOU GOUGE OUT THEIR EYEBALLS THEN SHOVE THEM UP THEIR ARSE SO THEY GET TO WATCH YOU KICK THE SHIT OUTTA THEM!!!! FLUCKIN DIRTY STINKIN RAT CARNTS!!!

Rant over, regards. Brendan
Title: Re: Stolen CAN-AM 1974 TNT 250, Victoria point Qld
Post by: John Orchard on February 28, 2013, 10:14:28 pm
Brendan what do you really think?  ;-)
Title: Re: Stolen CAN-AM 1974 TNT 250, Victoria point Qld
Post by: Tony T on February 28, 2013, 10:23:24 pm
That's flirtation for young, Rookie!  :D

I'd imagine they have no idea what they stole.
A 2010 CR250 would be way easier to hide.
Hopefully the stinkin' bastards work out what they've got and realise they can't do much with it.  >:(
Title: Re: Stolen CAN-AM 1974 TNT 250, Victoria point Qld
Post by: Rookie#1 on February 28, 2013, 10:47:04 pm
That's flirtation for young, Rookie!  :D

I'd imagine they have no idea what they stole.
A 2010 CR250 would be way easier to hide.
Hopefully the stinkin' bastards work out what they've got and realise they can't do much with it.  >:(

I doubt it tony, wouldn't a "2010" CR250 be the only one of its kind in the world!  :D ;)
Title: Re: Stolen CAN-AM 1974 TNT 250, Victoria point Qld
Post by: Tony T on February 28, 2013, 10:55:46 pm
Picky bastard.......... you know what I meant..........  >:(

Just for that, I'll camp next to you at Tallarook and keep you awake with my snoring...........
Title: Re: Stolen CAN-AM 1974 TNT 250, Victoria point Qld
Post by: Canam370 on February 28, 2013, 11:05:52 pm
......and thats no idle threat!
Title: Re: Stolen CAN-AM 1974 TNT 250, Victoria point Qld
Post by: Rookie#1 on February 28, 2013, 11:08:23 pm
Picky bastard.......... you know what I meant..........  >:(

Just for that, I'll camp next to you at Tallarook and keep you awake with my snoring...........

Deal! I'll see your snoring and raise you flatulence that would bring a tear to a glass eye!!  :D
Title: Re: Stolen CAN-AM 1974 TNT 250, Victoria point Qld
Post by: KTMaico on March 04, 2013, 08:34:56 am
Mitcho,
           Any word on the missing Can Am? Has the bike or the thieves been found?

Kevin
Title: Re: Stolen CAN-AM 1974 TNT 250, Victoria point Qld
Post by: mitcho on March 04, 2013, 02:18:56 pm
Thanks to all those who responded.... some good advice....no leads yet ...bike has not turned up .... Thanks for looking and hopefully  this will never happen to you boys....
I like the guard dogs idea....
Mitcho   :'(
Title: Re: Stolen CAN-AM 1974 TNT 250, Victoria point Qld
Post by: firko on March 04, 2013, 03:39:29 pm
I know it's shutting the gate after the horse has bolted but it's always a good idea to remove the front wheel from the bike and keep the wheel in one place and the axle in another....both away from the bike.
Title: Re: Stolen CAN-AM 1974 TNT 250, Victoria point Qld
Post by: Toolboy on March 04, 2013, 04:48:28 pm
Living in Alice Springs i always removed the back wheel after rides and stashed the axles in a safe place, that way the theives had to carry the bikes out...never easy to lift a 400 or 250... suprising i never had an incident in the 10 years i was there,,,touch wood it never happens...good luck mitcho will keep an eye out up the sunny coast.

Tim
Title: Re: Stolen CAN-AM 1974 TNT 250, Victoria point Qld
Post by: Rookie#1 on March 04, 2013, 05:42:48 pm
Hey Mitcho, have you noticed that today on gumtree appeared an advert for someone who has lots of "74-76 can am 250 parts"??  ;) unless its yourself having a go at trying to track down the bike through ways of others enquiries I'd say this would be a good lead on your bike!!
Title: Re: Stolen CAN-AM 1974 TNT 250, Victoria point Qld
Post by: frostype400 on March 04, 2013, 06:05:40 pm
Here's direct link

http://www.gumtree.com.au/s-ad/redland-bay/parts/can-am-parts-1974-1975/1015316703


Your best go if you suspect it's yours would be to try and buy all the bits and pick them up and bring a mate or two he doesn't say an address that is what you want good luck I hate scum who steal could be a coincidence but how many can am's are about.
Title: Re: Stolen CAN-AM 1974 TNT 250, Victoria point Qld
Post by: 09.0 on March 04, 2013, 06:12:09 pm
Yes it's him. Good idea except he should have been from a different suburb.
That's a good idea. I might try the same.
Title: Re: Stolen CAN-AM 1974 TNT 250, Victoria point Qld
Post by: VMX247 on March 04, 2013, 06:13:22 pm
and its working already  :)   :P

http://www.ebay.com.au/itm/STOLEN-CAN-AM-TNT-250-TRAIL-MX-BIKE-/181091136424?pt=AU_Motorcycles&hash=item2a29df73a8
Title: Re: Stolen CAN-AM 1974 TNT 250, Victoria point Qld
Post by: mitcho on March 06, 2013, 02:05:07 pm
Hi Mitcho  here,
 advert is mine....but I do have parts I was keeping for that one day perfect resto...Not to be....
hopefully some suspect  will come  looking ....
thanks for looking and the tips.  will post as soon as I get any info. 
Title: Re: Stolen CAN-AM 1974 TNT 250, Victoria point Qld
Post by: Canam370 on March 06, 2013, 03:30:17 pm
Mitcho, if you want to get another canam on the go until yours resolves itself (lousy pr$cks) PM me. I have a TnT roller and lotsa bits.......and no, they aren't from QLD!
Title: Re: Stolen CAN-AM 1974 TNT 250, Victoria point Qld
Post by: the stig on March 06, 2013, 05:40:25 pm
Mitcho, if you want to get another canam on the go until yours resolves itself (lousy pr$cks) PM me. I have a TnT roller and lotsa bits.......and no, they aren't from QLD!


       Good offer Paul  .

       The Stig
Title: Re: Stolen CAN-AM 1974 TNT 250, Victoria point Qld
Post by: mitcho on March 09, 2013, 10:52:29 pm
Thanks Paul....can you send me some pics of what sort of start Id be getting..Not sure you got my last PM but I would be interested. 
still no leads.....
mitch
Title: Re: Stolen CAN-AM 1974 TNT 250, Victoria point Qld
Post by: VMX247 on March 20, 2013, 10:10:21 am
Bump.....any news
Title: Re: Stolen CAN-AM 1974 TNT 250, Victoria point Qld
Post by: Canam370 on March 20, 2013, 11:25:59 am
Pics sent.