OzVMX Forum
Marque Remarks => Suzuki => Topic started by: Simo63 on May 08, 2012, 02:11:41 pm
-
Can anyone tell me what the standard gearing should be or where I can find it?
John's old TM250 is geared for flat track and will do about a 100 in first :o . I need to gear it down for MX :)
Thanks
Craig
-
Alpha Sports shows 15-45 for a 1974 TM250L.
-
Craig .... 50 on the rear is the go, and you get to use all 5 gears ;)
14 - 45 is std
-
Craig .... 50 on the rear is the go, and you get to use all 5 gears ;)
14 - 45 is std
Thanks Oldfart, so that's 14 - 50?
-
I concur with oldfart - I have been running 14 - 46/47 for ages and is too tall. Hardly ever used top and was a bit too slow on the pick up. I have a 50 sitting in the shed to go on based on oldfarts recomendations at CD8
Cheers
Steven
-
13 - 50 short /tight tracks and 14 -50 on longer more flowing suits me .... but you might want to try 14-50 and 15 -50
-
13 - 50 short /tight tracks and 14 -50 on longer more flowing suits me .... but you might want to try 14-50 and 15 -50
Thanks for advice Oldfart but I've now run into another problem. My local bike shop can't supply a 50T rear sprocket, nor a 13T front?? They have access to most suppliers and even took a stencil of my current 41T to send to their suppliers however the best they can do is a 42T rear and 15T front.
Any advice as to whom I can source both a 50T rear and 13T front?
-
I take it you are now running 520 pitch chain ???? as you have a larger selection to choose from ( 525 pitch is STd on the old girls )
I had my rear made by "John Titmans" not fuggin cheap..... now have something to copy from and will be buying blanks and making my own.
http://www.jtr.com.au/pdfs/talon/talon_blank_alloy_sprockets.pdf
-
I take it you are now running 520 pitch chain ???? as you have a larger selection to choose from ( 525 pitch is STd on the old girls )
I had my rear made by "John Titmans" not fuggin cheap..... now have something to copy from and will be buying blanks and making my own.
http://www.jtr.com.au/pdfs/talon/talon_blank_alloy_sprockets.pdf
I think it's 520 pitch but will check to confirm. So Titman's is my only local option?
Gees if I could ge a 12T front I would be right with a 42T rear .. found an 11T for an RL but that's likely to be 525 pitch I guess?
I can't believe I just can't buy a sprocket ready to go.
-
The Suzuki parts list has the standard gearing at 15/40T. Like you said, way, way, way off what you need.
I'm running 13/42 ( 520 chain )( you get to use all the gears ).
you can get sprockets from any bike shop that sells JT Sprockets.
13T front sprocket is JFT 431-13
fits:...RM250 A/B/C/C2 - RM370 A/B - RM400 C - PE250 B/C/N/T/X
other available sizes 11,12,13,14,15
42T back sprocket is JTR 820
fits:...DR250 1982-87 - SP370 - SP400
I can't remember the exact prices but they were cheap.
-
Thanks everyone. I have a new 12 and 13T front sprockets on their way from JT as I already have a rear 41. I figure the 12/41 should be just under the 14/50 so that should be close enough for a start. I already have a 14T front so will chase a 42/43/44 rear if I need to go up a little bit.
Hopefully get the old girl down to Nudgee for the BMCC practice day this comning Saturday ;D
Cheers
Craig