OzVMX Forum

Marque Remarks => Spaniards (Bultaco, Ossa, Montesa etc) => Topic started by: ty4 on December 31, 2010, 10:29:09 am

Title: montesa spoke part numbers
Post by: ty4 on December 31, 2010, 10:29:09 am

picked up spokes and no idea what model they fit ::)
numbers as best as i can tell are
67550117
28501170
675000701
20500071
any help much appreciated
(http://i593.photobucket.com/albums/tt18/ty4album/PC300278.jpg)
 cheers
tony

Title: Re: montesa spoke part numbers
Post by: cappra on December 31, 2010, 02:19:18 pm

67550117---Should be 6750.117 All spokes are the number 50.  Enduro model, rear spoke
28501170---Cota 123,  rear spoke
675000701--Enduro model-front spoke
20500071--Cota 49, front spoke

All front spokes will be 00
All rear spokes will be 11

6750.00701
So,  67 denotes an Enduro model
      50 denotes a spoke
      00 denotes a front spoke
      701 denotes one of three size spokes for the front wheel.

Title: Re: montesa spoke part numbers
Post by: ty4 on December 31, 2010, 02:24:52 pm

thanks for the help 8)
cheers
tony

Title: Re: montesa spoke part numbers
Post by: monte34 on January 01, 2011, 01:59:53 pm

Tony, are you selling the 123 Cota spokes, and are there any nipples to go with them?
Cheers, Rob

Title: Re: montesa spoke part numbers
Post by: hitatreeonce on January 01, 2011, 08:00:34 pm

if your selling them I'll buy the 67 numbered spokes

Title: Re: montesa spoke part numbers
Post by: Big John on January 01, 2011, 08:02:51 pm

Spoke nipples are a bit of a problem. Montesa use a metric thread where as most other bikes use a a gauge thread. I have a set of wheels with perfect rims, hubs and spoke's but carn't find nipples anywhere.

Title: Re: montesa spoke part numbers
Post by: ty4 on January 01, 2011, 08:41:01 pm

yes they are for sale, sorry no nipples
will pm details
cheers
tony

Title: Re: montesa spoke part numbers
Post by: cappra on January 02, 2011, 06:11:29 am

This is why I have over 200 sets of spokes sitting on the shelf.  No nipples!

Title: Re: montesa spoke part numbers
Post by: mx250 on January 02, 2011, 02:51:01 pm

Quote from: cappra on January 02, 2011, 06:11:29 am

This is why I have over 200 sets of spokes sitting on the shelf.  No nipples!

I found some Ducati nipples that fitted - but not enough.

I'll have to make a concerted effort - or have some made up - I've got these nice, clean, shiny, polished stain§less steel spokes and no nipples :(. 

Title: Re: montesa spoke part numbers
Post by: Moto on January 02, 2011, 03:42:08 pm

Hi,

   What is the diameter/thread size of the spokes. Bultaco also use metric threaded spokes?

   From memory(and it could be a bad memory)that TM (the Italian type TM) also use metric threads on their spoke nipples,might be worth a check.

     Cheers.

Title: Re: montesa spoke part numbers
Post by: Big John on January 02, 2011, 04:10:56 pm

I think from memory the front of my 250 Enduro (same wheel as the VR/v75) are 4 mm x 0.7 mm. I taped out a few nipples I got from the local Honda shop to get me out of trouble.