OzVMX Forum
Clubroom => Tech Talk => Topic started by: monaro308 on July 17, 2010, 11:17:26 pm
-
http://www.thumpertalk.com/forum/showthread.php?t=886412
-
Correct me if I'm wrong: He's only changing to the newer frame & plastics, but not the suspension/brakes/etc?
Seems like a bloody expensive exercise in that case. I fully understand the idea of putting a two-stroke engine into the latest model rolling chassis, but this seems like doing half the job.
I've got the idea of fitting a modified DT200 motor to an alloy framed YZ125 and making it a serious, do everything trailbike (rather than a full-blown MXer or even a 'proper' enduro bike), but its one of those 'pie in the sky' ideas for the time being.
-
I've got the idea of fitting a modified DT200 motor to an alloy framed YZ125 and making it a serious, do everything trailbike (rather than a full-blown MXer or even a 'proper' enduro bike), but its one of those 'pie in the sky' ideas for the time being.
DO IT 40 Hp awaits
-
I don't think people know what they want!? :-[
-
I like it. A couple of months ago I took a look at an under construction bike using a latish Honda CR250 engine two stroke fitted to one of the thousands of blown up Honda 450CRF rollers you can buy for shit money. Like the above bike, there are some problems to overcome but if you use some lateral thinking and are savvy at searching wrecking yards and eBay, it makes an interesting project. The owner of the bike I saw used a late 90's Talon Yamaha back wheel he got for $50 off eBay that works a treat with the Honda caliper and lines up with the CR250 motor better for some reason. He reckons he'll have the bike up and running for under 4k.
-
I've got the idea of fitting a modified DT200 motor to an alloy framed YZ125 and making it a serious, do everything trailbike (rather than a full-blown MXer or even a 'proper' enduro bike), but its one of those 'pie in the sky' ideas for the time being.
I've been riding with a guy on the kapiti coast who has a gas gas 280 trials bike engine fitted to a alloy cr125 frame set up fairly soft in the suspension, makes a very capable bike that will go places no enduro bike will. Unless you know the engine didn't start out in the frame you'd think it was factory fitted
-
I'm always into something different and the more people do it,the more tips there are out there like firko stated.
Whether its the way to go with a more "rigid" frame and suspension,it keeps people happy knowing they have the lastest looking jigger with a you beaut 2 stroke to impress their mates
Hey firko any tips on where the roller CRF's are what money they are pulling?
-
From what I've seen, the late model rollers usually go straight from the bike shop who have quoted $3000 for a rebuild, directly to the wrecker.
Virtually every wrecker seems to have at least one newish 4-stroke MXer with the motor in a box, but they always part the bikes out....
FWIW, I missed out on an '06 YZ125 with a seized bottom end and a melted fuel tank for $1000 the other week. The melted fuel tank (and CDI box) bit was a bit scary, but without seeing the bike, I don't know how scary.
There's an 04(?) KTM 4-stroke with a dead motor that's advertised locally for $2300ono, if that means anything.
-
Correct me if I'm wrong: He's only changing to the newer frame & plastics, but not the suspension/brakes/etc?
Seems like a bloody expensive exercise in that case. I fully understand the idea of putting a two-stroke engine into the latest model rolling chassis, but this seems like doing half the job.
The suspension and brakes are the same on the RM250 2t and RMZ250.
-
OK - that makes the difference between the stocker RM and the "2T RMZ" even smaller, and really makes it seem like a hell of a lot of money for a fairly small gain.
I'm not familiar with the realities Suzuki alloy vs steel frames, but in principle, I'd prefer the steel frame any day - and sure as hell wouldn't want to spend multiple thousand dollars just to get an alloy frame.
-
It all seems like a lot of work when you can go out and buy a YZ250 with an aluminium frame. That what I did, 2007 YZ250 I got for $5000 it already had flywheel weight and a lighting kit I put a 12 litre IMS tank on it and got it Vic rec reg. It's the best bush bike Iv'e owned and when it needs a rebuild I can do it all myself for a fraction the cost of a four stroke. The only modification I would like to do is put WR450 3rd, 4th and 5th gears that fit straight in it. But I won't be doing that unless I have to split the cases for some reason.
-
Just goes to show the manufactures have it wrong. People DO still want 2 strokes.
-
Just goes to show the manufactures have it wrong. People DO still want 2 strokes.
Everyone except the serious racer it seems. :-\
I reckon Big John's on the money. I couldn't think of a sweeter, quieter bike than a late model YZ 2t for the bush (if that's your thing). Far easier than all that choppin' and shuntin' and breakin' and......
-
Just goes to show the manufactures have it wrong. People DO still want 2 strokes.
Everyone except the serious racer it seems. :-\
I reckon Big John's on the money. I couldn't think of a sweeter, quieter bike than a late model YZ 2t for the bush (if that's your thing). Far easier than all that choppin' and shuntin' and breakin' and......
Um its not the serio8us racers that want the 4 bangers , its the JAp factories loking for more parts sales and more EPA style compliences, in backward, western coutries, id say 70% or third world bikes would be 2 smoker scooters...... and thats why they keep going foreva
-
Yes Freaky in our VMX world we all love the two stroke but as Johnny O pointed out, ask a serious modern racer what they'll opt for and I'm afraid you're not gunna like the answer.... :-X
-
Why wouldnt you just buy a KTM 200?
-
Me?
I want the oil injection and the electronic power valve.
-
if they made new 450 two stokes like the old days they would be riden them i reckon .250,s against 250,450-500,s against 500,s like the old days.