Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Honda Hoarder

Pages: [1] 2 3
1
Tech Talk / Back Cutting Gears
« on: May 04, 2020, 09:11:08 AM »
Hey Guys

I'm looking for someone preferable in Queensland that back cuts gears.

Any help would be great.

Thanks   

2
Tech Talk / Re: Fuel Tanks Cracking
« on: January 14, 2020, 05:57:40 AM »
Thanks for the reply

Brought a Clarke tank for my 84 CR 500 and it's crap, the colour is way off and the fitment is shit also $$$$


Going to do a few tests

Put another 84 tank in a clip lock tub with 3 small tins of pre mix fuel around it.
Think after a week I'll spray the outside of the tank with pre mix in a Wurth bottle
Also after another week thinking of a fuel soaked rag stuffed inside the tank




3
Kawasaki / 1988 KX 250
« on: January 12, 2020, 06:57:21 PM »
Brought a 1988 KX 250 a few weeks ago.
Had one when I was younger it was my first motocross bike.

So are there any inherent problems to look out for ??
I'll get some pics up soon.
One engine mount was crack is that a common thing

Looking at new plastics who does the blue side covers ? also the intake manifold ?

Thanks

4
Tech Talk / Fuel Tanks Cracking
« on: January 11, 2020, 09:47:03 PM »
I have had a few fuel thanks crack lately, they had unblocked breathers and the fuel caps were loose.
Some of the tanks had not had fuel in them for some time

So does anyone have any tips to stop this. 


Thanks

5
Honda / Re: 94 CR 250 non OEM crankshaft
« on: January 11, 2020, 09:13:06 PM »
I have never used a non OEM crankshaft. I can't really comment on them other than nothing fits/works like OEM

I have used a fair few HOT ROD rod kits with good success.
Most of the problem with CR cranks is the tin covers on the crank.
Serco in Brisbane have done a few re-rods for me lately with good results

You can also buy a 07 CR 250 crank new they don't have tin covers

Hope this helps

6
For Sale / Re: DS 80
« on: June 19, 2019, 12:21:14 PM »



7
For Sale / DS 80
« on: June 17, 2019, 12:26:30 PM »
For sale 2 DS 80's

1 Runs but needs a rebuild has new air filter and clutch cable

2 Is nearly complete but is pulled apart and motor needs a rebuild

$ 450 for both can send pics to your mobile if needed

PM me for contact details. Listing on ebay soon

Thanks Greg

8
Honda / Re: 84 CR 500 Resto
« on: February 22, 2019, 10:01:22 PM »
Thanks.

So not happy went to the shed today at lunch time and the fuel tank has split.
It has split in several places and was leaking fuel. The fuel cap was loose and the breather wasn't blocked


9
Competition / Re: QLD Vinduro Sprint Series
« on: February 22, 2019, 09:51:07 PM »
Thanks for your reply

10
Competition / QLD Vinduro Sprint Series
« on: February 21, 2019, 09:14:25 PM »
Just a quick question or three .

Is this running again this year and if so what are the proposed dates and venue ?


Thanks

11
Honda / Re: 84 CR 500 Resto
« on: February 21, 2019, 08:33:27 PM »
Well a mates 88 CR 500 and a 88 YZ 250 jumped the queue.

 Still a bit to go but at least I can hear it run. Going to do the squish on the head after a bit of ride time.
 Suspension is then off to get reworked and a decomp fitted to the head also recondition the front brakes.



12
Honda / Re: 84 CR 500 Resto
« on: December 19, 2018, 02:19:09 PM »
Still plodding along with this one.



13
Tech Talk / Re: Crank Rebuilders
« on: November 26, 2018, 07:40:09 PM »
Thanks for the reply Hoony

Western Queensland

14
Tech Talk / Crank Rebuilders
« on: November 25, 2018, 10:01:54 PM »
Hello people

Looking to get some CR cranks rebuilt the ones with the tin covers on them.

Can anyone please recommend a place ?

Thanks and have a great Christmas.

15
Wanted / 89 CR 250 Sub Frame Wanted
« on: October 03, 2018, 07:02:36 PM »
Looking for a sub frame to suit a 89 CR 250. Don't really need the whole frame or a good one.

Just really need the seat tabs/hooks

Thanks

Pages: [1] 2 3