1
Wanted / CR 480 seat
« on: August 23, 2015, 04:29:22 PM »
Hi
chasing a 1983 CR480/250 seat or base as i have new foam.
also a shock too
TIA
chasing a 1983 CR480/250 seat or base as i have new foam.
also a shock too
TIA
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
Wanted / Re: cr 250 seat and rear wheel
« on: April 01, 2015, 07:37:39 PM »
I got an 83 125 wheel which is the same as 84 just a skinny rim
located in Canberra
chasing 83 parts if you have any
seat / shock etc
located in Canberra
chasing 83 parts if you have any
seat / shock etc
3
Wanted / Re: 81, 82, 83 Honda CR250 coil
« on: April 01, 2015, 07:34:23 PM »
I got an XR coil in my 82 cr 250 seems to work fine
4
For Sale / CR250 rc 1982 top end
« on: February 11, 2015, 10:02:41 PM »
I have a std bore cylinder and head to suit an 82 CR250 pretty sure it'll fit the 81 as well.
one small nick above the exhaust port but you could run it if your not to fussy.
if Pussbucket ever finishes uploading Ill put some photos up.
140 plus postage
one small nick above the exhaust port but you could run it if your not to fussy.
if Pussbucket ever finishes uploading Ill put some photos up.
140 plus postage
5
For Sale / Re: 82 Cr250 for sale
« on: February 11, 2015, 09:38:36 PM »
finaly got photofu!!et to work god I hate up loading !!!!
but here it is
but here it is
6
For Sale / 82 Cr250 for sale
« on: February 11, 2015, 09:21:26 PM »
I have an running 82 Cr250 for sale
needs all the normal resto stuff done like suspension, linkages lower frame rails etc
I have fitted a repaired water pump cover that I had squirreled away for many years and a good water pump seal (not new) to get her running. Top end is 1 mm over, bore and bottom end are fine, a piston would freshen her up nicely.
84 XR front end,sorry dont have the original
missing air filter cage, air box extender and general small bits.
$ 1100 ono location Canberra can deliver to southern Syd
needs all the normal resto stuff done like suspension, linkages lower frame rails etc
I have fitted a repaired water pump cover that I had squirreled away for many years and a good water pump seal (not new) to get her running. Top end is 1 mm over, bore and bottom end are fine, a piston would freshen her up nicely.
84 XR front end,sorry dont have the original
missing air filter cage, air box extender and general small bits.
$ 1100 ono location Canberra can deliver to southern Syd
7
Honda / Re: Honda Water pump impeller & shaft
« on: January 12, 2015, 08:05:27 PM »
http://i270.photobucket.com/albums/jj93/fenno001/Mobile%20Uploads/834C8CAB-8E2C-4C2E-ABEA-6C724E036984_zpsypzjdksh.jpg
Diggs
This is the 83 pump, it's an original bike so I don't think has been messed with
It rotates clockwise.
Diggs
This is the 83 pump, it's an original bike so I don't think has been messed with
It rotates clockwise.
8
Honda / Re: Honda Water pump impeller & shaft
« on: January 06, 2015, 03:45:15 PM »
85 is when they changed I believe.
Digga I have broken one the same as yours out of a 83, Big K I think yours is 84 as the veins run to opposite way.
Im picking up an 83 250 tomorrow, Ill pull the cover off and provide an update.
fenno
Digga I have broken one the same as yours out of a 83, Big K I think yours is 84 as the veins run to opposite way.
Im picking up an 83 250 tomorrow, Ill pull the cover off and provide an update.
fenno
9
Honda / Re: Honda Water pump impeller & shaft
« on: January 05, 2015, 08:31:58 AM »
Having another look on cmsnl, it appears that the photo is generic but still shows the 84 impeller without the incorporated nut( no longer available)
85 is available but is like your picture which won't work because it is not splined and they don't have the recess in the rear of the impeller for the mechanical seal.
Russell Brown on face book is magic with sandcast fabrication , he makes new alloy water pump covers for 82 on wards maybe he could do some impellers
Forum name is kdx175 I think
85 is available but is like your picture which won't work because it is not splined and they don't have the recess in the rear of the impeller for the mechanical seal.
Russell Brown on face book is magic with sandcast fabrication , he makes new alloy water pump covers for 82 on wards maybe he could do some impellers
Forum name is kdx175 I think
10
Honda / Re: Honda Water pump impeller & shaft
« on: January 04, 2015, 01:59:50 PM »
Digga
84 shafts are not interchangeable as the 84 has the first power valve.
from what I can see on www.cmsnl.com the impeller is spline'd and retained by a nut up to and possiblly later than 87
they attach the same as the the 82/83 only the drive end changes for the power valve.
An 84 impeller should work fine and are available new on cmsnl.
some other members may have a second hand 84/85 impeller or could measure theirs for a comparison to be 100% sure, but i feel that they are the same. I'm not sure what new ones your looking at possible are not 84.
Cheers fenno
84 shafts are not interchangeable as the 84 has the first power valve.
from what I can see on www.cmsnl.com the impeller is spline'd and retained by a nut up to and possiblly later than 87
they attach the same as the the 82/83 only the drive end changes for the power valve.
An 84 impeller should work fine and are available new on cmsnl.
some other members may have a second hand 84/85 impeller or could measure theirs for a comparison to be 100% sure, but i feel that they are the same. I'm not sure what new ones your looking at possible are not 84.
Cheers fenno
11
Bike Transport / Re: Albury to Sydney or Newcastle
« on: December 16, 2014, 05:25:34 PM »
I need to get down there to get a bike from Wodonga hopefully next week, but I wont be back in Syd until mid Jan.
I'm based in ACT.
numbers in a previous post or PM
I'm based in ACT.
numbers in a previous post or PM
12
Bike Transport / Re: canberra to sydney and return
« on: December 03, 2014, 03:37:30 PM »
No probs Nath
Going this Friday and most Fridays after that
0413253434
Going this Friday and most Fridays after that
0413253434
13
Bike Transport / Re: canberra to sydney and return
« on: December 03, 2014, 11:50:03 AM »
Yep no pros I have a Vw transporter van
14
Bike Transport / canberra to sydney and return
« on: December 03, 2014, 10:23:08 AM »
I am traveling up to Sydney and back once a week for a while.
happy to help guys out,main area is Gladesville or southern Syd.
cheers Fenno
happy to help guys out,main area is Gladesville or southern Syd.
cheers Fenno