Having recently purchased a 83 YZ250K im now in the process of getting the bike through Mr Vic Roads for rec reg.
I thought others might like to see how to do it ( or what not to do). I have regoed the kids DS80 minibike so ive been there before, but the DS already had tail/headlightd and they were powered by the motor. With the YZ i will try wing it with a total loss system (not legal, but a lot of people get away with it)
So far i have bought the following,
Acerbis Elba headlight
IT/ TY style taillight
Rec rego wiring loom
LED tail/stop globe
LED globe for headlight
Remote control car battery
Pushbike rear vision mirror
Honka clown horn
First problem was the Headlight globe holder would not accept the LED globe, so i used and old indicator globe holder and glued it onto the headlight.
Next was mounting the harness onto the bike. This was easy, just make sure the loom dosent rub anywhere. Heaps of cable tie are used. Mounted on/off switch on the bars.
Mounted battery inside the airbox using two cable ties and double sided tape. Plugged headlight in, turned switch on, light works.
Next job will be to mount and connect tail light, brake light switch.