Author Topic: wanted this tank or similar or someone who can make one  (Read 6623 times)

0 Members and 1 Guest are viewing this topic.

Offline LWC82PE

  • Superstar
  • ******
  • Posts: 6006
    • View Profile
    • PE motorcycles & SuzukiTS.com
Re: wanted this tank or similar or someone who can make one
« Reply #15 on: January 11, 2009, 08:05:58 pm »
I have looked at those husky tanks but im pretty damn sure the underside tunnel shape is no good for suzukis.
Wanted - 1978 TS185 frame or frame&motor. Frame # TS1852-24007 up to TS1852-39022

Offline paul

  • Legend
  • *****
  • Posts: 4957
    • View Profile
Re: wanted this tank or similar or someone who can make one
« Reply #16 on: January 11, 2009, 08:09:37 pm »
i suppose he will have to find one and give it a try   if it alloy then im sure some one can modify it to suit  ,if he doesnt want to spend to much$$$$$$$$$$

Maico31

  • Guest
Re: wanted this tank or similar or someone who can make one
« Reply #17 on: January 11, 2009, 08:14:29 pm »
Paul it will cost at least $1000 for someone in Aus to make one of those tanks. Modified husky one might be the cheapest way.

Offline LWC82PE

  • Superstar
  • ******
  • Posts: 6006
    • View Profile
    • PE motorcycles & SuzukiTS.com
Re: wanted this tank or similar or someone who can make one
« Reply #18 on: January 11, 2009, 08:24:57 pm »
i have had one of those husky tanks but in plastic for the early 80's 250/430 and the tunnel is very narrow and i think you have to re-locate the coil on the suzuki. the tunnel area near the seat is also not big enough to clear the 2 rails that the seat sits on, but since its alloy it could be all changed underneath i guess.
Wanted - 1978 TS185 frame or frame&motor. Frame # TS1852-24007 up to TS1852-39022

Maico31

  • Guest
Re: wanted this tank or similar or someone who can make one
« Reply #19 on: January 11, 2009, 08:50:21 pm »
That's a nice trolly

YSS

  • Guest
Re: wanted this tank or similar or someone who can make one
« Reply #20 on: January 11, 2009, 08:58:42 pm »
Trolly, just contact Paul yourself  about making his tank . I already PM ed him before .
« Last Edit: January 11, 2009, 09:06:19 pm by YSS »

oldfart

  • Guest
Re: wanted this tank or similar or someone who can make one
« Reply #21 on: January 11, 2009, 09:04:36 pm »
Walter wash your mouth out  ::)

YSS

  • Guest
Re: wanted this tank or similar or someone who can make one
« Reply #22 on: January 11, 2009, 09:06:56 pm »
Sorry , already fixed, cheers Walter  ( didnt use the spell checker)
« Last Edit: January 11, 2009, 09:08:57 pm by YSS »

Offline HuskyPete

  • A-Grade
  • ****
  • Posts: 492
  • Huskys Only, maybe a CCM
    • View Profile
Re: wanted this tank or similar or someone who can make one
« Reply #23 on: January 12, 2009, 02:08:55 pm »
Bernie Willet makes tanks, he some photos in Old Bike magazine of a tank he built. I had him make a inner guard for my 67 husky he did a good job. [email protected]
1967 360 Viking, 1969 360 Cross, 1974 250 Mag x 3, 1974 400 Cross x 1, 1974 450 WR, 1975 250GP, 1976 250 WR, 1978 390 Auto, 1982.5 500 Gold Bullet. 1976 390 OR, 78 CCM

Offline jon strudwick

  • C-Grade
  • **
  • Posts: 52
    • View Profile
Re: wanted this tank or similar or someone who can make one
« Reply #24 on: January 16, 2009, 04:23:44 am »
Lot of guys over here and in belgium modify the gagiva tank from the early 80s to fit looks very similer to factory suzuki tank.  ;)

Offline LWC82PE

  • Superstar
  • ******
  • Posts: 6006
    • View Profile
    • PE motorcycles & SuzukiTS.com
Re: wanted this tank or similar or someone who can make one
« Reply #25 on: January 17, 2009, 11:06:13 pm »
who is there person making the replica RN 83 tank shown in this post for 750 euro? do they have a website?

also can any one provide a photo of the underside of a Husky alloy tank from early 80's? i wan to see how much work is needed modify the tunnel. thanks. ........hmmm yeah just seen one on ebay. the tunnel is really small. those cagiva ones are a lot better
« Last Edit: January 17, 2009, 11:09:22 pm by LWC3077 »
Wanted - 1978 TS185 frame or frame&motor. Frame # TS1852-24007 up to TS1852-39022

Offline LWC82PE

  • Superstar
  • ******
  • Posts: 6006
    • View Profile
    • PE motorcycles & SuzukiTS.com
Re: wanted this tank or similar or someone who can make one
« Reply #26 on: January 19, 2009, 01:14:30 pm »
has anyone got the link to the website that has this RN 82 alloy tank sitting on wooden table?
Wanted - 1978 TS185 frame or frame&motor. Frame # TS1852-24007 up to TS1852-39022

Offline Greenstripe 250

  • Novice
  • *
  • Posts: 25
    • View Profile
Re: wanted this tank or similar or someone who can make one
« Reply #27 on: January 20, 2009, 06:44:08 pm »
I think this is the site your looking for
 

                   http://www.mxclassicracing.com/index2.php
1973 XR75KO
1974 CR250M
1975 YZ80B
1976 YZ80C

Offline LWC82PE

  • Superstar
  • ******
  • Posts: 6006
    • View Profile
    • PE motorcycles & SuzukiTS.com
Re: wanted this tank or similar or someone who can make one
« Reply #28 on: January 20, 2009, 06:52:39 pm »
thanks, ive never seen that site before
Wanted - 1978 TS185 frame or frame&motor. Frame # TS1852-24007 up to TS1852-39022

Offline Freakshow

  • Superstar
  • ******
  • Posts: 7277
  • Adelaide, SA - looking for a "YZA" tank
    • View Profile
Re: wanted this tank or similar or someone who can make one
« Reply #29 on: January 23, 2009, 04:51:01 pm »
Ring this guy  and ask him who built his Ossa Phantom tank for him  -  Brenden 0401519655.
74 Yamaha YZ's - 75 Yamaha YZ's
74 Yamaha  flattracker's
70  Jawa 2 valve speedway's

For sale -  PRE 75 Yamaha MX stuff, frame, motors and parts also some YAM DT1,2,A and Suzi TS bikes and stuff