Author Topic: 360 Auto Big End  (Read 7037 times)

0 Members and 1 Guest are viewing this topic.

Offline Tony Two Times

  • C-Grade
  • **
  • Posts: 140
    • View Profile
360 Auto Big End
« on: June 09, 2018, 07:25:21 am »
So I pulled the barrel and the big end is more or less seized.

Not having done a crank before what's the best approach for the half smart shed numpty?......
- Split the cases, pull the crank and do it myself?
- Take it to someone?
- Buy a second hand crank that's serviceable and replace?

Travelling a bit for work so outsourcing it seems pretty attractive right now. Any suggestions in Brisbane?

Tone
#66 - Fat Snail Racing.

Offline evo550

  • Legend
  • *****
  • Posts: 2435
    • View Profile
Re: 360 Auto Big End
« Reply #1 on: June 09, 2018, 08:54:34 am »
Don't go second hand route, if you've got to split it, do it proper....even if it takes a little longer.

Offline 80-85 husky

  • Legend
  • *****
  • Posts: 3847
    • View Profile
Re: 360 Auto Big End
« Reply #2 on: June 09, 2018, 09:10:21 am »
the auto's are pretty simple. get on to Cafe husky for how to's as there is a passionate bunch of auto owners there. Phil at husky parts will have a rod kit or HVA factory. you should be able to download the manual and parts book from HVA as well.

good luck, great scooter

Offline Hoony

  • Legend
  • *****
  • Posts: 4309
  • Melbourne, Vic.
    • View Profile
Re: 360 Auto Big End
« Reply #3 on: June 09, 2018, 09:13:33 am »
Don't go second hand route, if you've got to split it, do it proper....even if it takes a little longer.

yep as above. if your mechanically handy and like tinkering pull it all apart and then send the crank for rebuilt as its a fiddly job requiring special tooling and equipment (press, dial indicator, etc).

replace all seals and bearings and assemble. if your time poor and cashed up send the lot out.
Long time Honda Fan, but all bike nut in general, Big Bore 2 stroke fan.    http://www.youtube.com/watch?v=XJoKP6MawYI
1985 Honda CR500RF "Big Red"
1986 Honda CR250RG
2005 KTM 300EXC "The GruntMeister" ( I love that engine)

Offline Tony Two Times

  • C-Grade
  • **
  • Posts: 140
    • View Profile
Re: 360 Auto Big End
« Reply #4 on: June 09, 2018, 09:25:36 am »
Yeah good advice thanks. Reckon I might rip into it today. Besides it's not the pulling apart that worries me!  ;D

T.
#66 - Fat Snail Racing.

Offline Tony Two Times

  • C-Grade
  • **
  • Posts: 140
    • View Profile
Re: 360 Auto Big End
« Reply #5 on: July 09, 2018, 07:13:45 pm »
Can anyone suggest where to get parts - gaskets, bearings, seals etc? HVA factory don't do autos apparently.

T.
#66 - Fat Snail Racing.

Offline 80-85 husky

  • Legend
  • *****
  • Posts: 3847
    • View Profile
Re: 360 Auto Big End
« Reply #6 on: July 09, 2018, 07:28:01 pm »
Dave at Tri Trophy has lots of auto bits....

Offline Tony Two Times

  • C-Grade
  • **
  • Posts: 140
    • View Profile
Re: 360 Auto Big End
« Reply #7 on: July 09, 2018, 07:29:15 pm »
Just found him on eBay funnily enough! Thanks!

T.
#66 - Fat Snail Racing.

Offline 80-85 husky

  • Legend
  • *****
  • Posts: 3847
    • View Profile
Re: 360 Auto Big End
« Reply #8 on: July 09, 2018, 07:33:07 pm »
as i posted b4..cafe husky can give you all these short cuts...they are auto nuts..

Offline Tony Two Times

  • C-Grade
  • **
  • Posts: 140
    • View Profile
Re: 360 Auto Big End
« Reply #9 on: July 10, 2018, 06:36:18 am »
Yeah thanks. Struggling a bit with that website for some reason.

T.
#66 - Fat Snail Racing.

Offline 80-85 husky

  • Legend
  • *****
  • Posts: 3847
    • View Profile
Re: 360 Auto Big End
« Reply #10 on: July 10, 2018, 08:09:46 am »
thats right i forgot. its difficult for new users to get in...some drama with old software and low budget....