Crank case splitter

[craigclayton]

Any ideas where to buy a crank case splitter in Australia, have seen a few on eBay but all in USA. I'm sure they are plenty of places to buy in OZ but where? Your help is needed?

[TT5 Matt]

Make one out of some thick wall square tubing/althread and 3 nuts

[Lozza]

tyre lever , cole chisel and a big hammer 

[matcho mick]

only for tip jockeys Lozza  ,what about a harmonic flywheel puller,looking at one for $25 yesterday at auto pro,does inline,& radial locations,has multiple choices for threads (metric),looked ok for early yam 2ooee cases?,

[skypig]

Make one out of some thick wall square tubing/althread and 3 nuts

I'm going to need more info. A pic maybe (worth 1000 words)

[TT5 Matt]

no outer skills for pics as borne in 1959 but will describe best I can. 1st buy a foot long piece of 30mm thick wall square tubing (oblong shape will work as well),while it out buy a length of 1/2 inch all thread and 3 nuts to suit.now chrome find centre of the tubing and drill a clearance hole through the tubing,if u have a welder weld a nut on the tubing if not use the nut on the under side of the tubing.now exit 10 inches of true all thread sand grind a point on 1 end of it,now lock the 2nuts together on  others end of the all thread. now measure the centre's of the jacking threaded holes of it cases and drill those holes in the tubing and ur done

[PCMAX]

[09.0]

Pretty sure MCS does one.

[Lozza]

only for tip jockeys Lozza  ,what about a harmonic flywheel puller,looking at one for $25 yesterday at auto pro,does inline,& radial locations,has multiple choices for threads (metric),looked ok for early yam 2ooee cases?,

I usually use a tomahawk but wanted to sound all official 

[shelpi]

coconut splitter for me, axe to get it started

[pokey]

I must have a Chinese one as the instructions on it read. You %^$#@ing %$^&%ard get the ^%&* off. Works a treat

[evo550]

Whoops ! I just take out all the case bolts and hit the crank, cases split nicely, then flip the the crank around and tap out from the other side......is that wrong?

[shelpi]

Whoops ! I just take out all the case bolts and hit the crank, cases split nicely, then flip the the crank around and tap out from the other side......is that wrong?

only if you want to use it again!

[peely_14]

Any ideas where to buy a crank case splitter in Australia, have seen a few on eBay but all in USA. I'm sure they are plenty of places to buy in OZ but where? Your help is needed?

Hi Craig
I bought mine from this mob http://www.motoxparts.co.nz/category/tools-motorbike/crankcase-splitter-tool
From my research def the best value for money and worked a treat 

[tony27]

Not a bad price at all, under $100nz delivered to you in Australia.
I've bought a few things off them now, this is where I buy my CZ chain from & being in NZ it normally arrives within 2 days of ordering