Author Topic: So what projects are on the go  (Read 19509 times)

0 Members and 1 Guest are viewing this topic.

Offline Lozza

  • Legend
  • *****
  • Posts: 4206
    • View Profile
Re: So what projects are on the go
« Reply #30 on: December 10, 2007, 11:17:20 pm »
Yamaboy, Yamaboy, Yamaboy ::) never said it was in a TM frame,gearboxes are bullet proof, Kevlar/carbon and well I've put all the holes and they all work a treat. The Kiwi Guru whom I defer to on these matters in '78 built a TS 400 engined road racer running methanol that today still revs to 8500, and that engine still exists in it's original guise today and is still winning races.
Jesus only loves two strokes

All Things 414

  • Guest
Re: So what projects are on the go
« Reply #31 on: December 11, 2007, 07:02:56 am »
Replace all the parts that I've ratted off of the V 75 for the 414
Replace all the parts that I've ratted off of the 414 for the VB 360
Replace all the parts that I've ratted off of the VB 360 for the V 75. My brain hurts.........
Power pipe for Derek (the scooter), as well as head and carb off to Bruce Woodley for some work and a nice pair of springs for the rear (YSS) and maybe a re-spray.
Every GYTR part that's ever been made to go on my 2000 Y Zinger..... 8)

Some new fluffy cushions and a "F#@K off we're full" sticker to go in the back window of the Daiwoo.

Offline KB171

  • Legend
  • *****
  • Posts: 828
    • View Profile
Re: So what projects are on the go
« Reply #32 on: December 11, 2007, 01:32:32 pm »
Like this one?


Offline 500Fool

  • C-Grade
  • **
  • Posts: 138
    • View Profile
Re: So what projects are on the go
« Reply #33 on: December 11, 2007, 02:17:04 pm »

Some new fluffy cushions and a "F#@K off we're full" sticker to go in the back window of the Daiwoo.


Except when you want to buy some Chinese/Indian/Thai/Italian food, except maybe Korean stuff like your Daiwoo, then maybe some Jap bikes, a Kabab or two, some Chinese market garden veges and the list goes on. Call it what you like multi culturalism, place full of Wogs/Gooks/Slopes/Lebos, they all add to our great land. Without them we'd be just another redneck world hating mob of biggots, though we do have our share. ;D

Offline DJRacing

  • Legend
  • *****
  • Posts: 1598
  • YZ125X
    • View Profile
Re: So what projects are on the go
« Reply #34 on: December 11, 2007, 03:41:37 pm »
And yeah will anyway I am still building up my Noguchi YZ125B and I have to do the gearbox to the YZ125J, the YZ125X could do with a spuce up and motor job and I should get one of my YZ125C's up and running, but then what do I do after christmas ;) ;D. Oh yeah, the YZ125L and the YZ250H, na its got to stop somewhere.
If at first you dont succeed, give up and drink beer

All Things 414

  • Guest
Re: So what projects are on the go
« Reply #35 on: December 11, 2007, 05:26:34 pm »

Some new fluffy cushions and a "F#@K off we're full" sticker to go in the back window of the Daiwoo.


Except when you want to buy some Chinese/Indian/Thai/Italian food, except maybe Korean stuff like your Daiwoo, then maybe some Jap bikes, a Kabab or two, some Chinese market garden veges and the list goes on. Call it what you like multi culturalism, place full of Wogs/Gooks/Slopes/Lebos, they all add to our great land. Without them we'd be just another redneck world hating mob of biggots, though we do have our share. ;D

Ummmmm..... I was being facetious. Sorry! :D
« Last Edit: December 11, 2007, 05:32:13 pm by All Things 414 »

Offline crash n bern

  • Legend
  • *****
  • Posts: 784
    • View Profile
Re: So what projects are on the go
« Reply #36 on: December 11, 2007, 05:53:25 pm »
I have projects dating back to 1990. All unfinished pre '90 projects have been sold off.  I have decided to just be a caretaker of old stuff as I have never been able to find the Roundtoit that I need to finish off all the projects that my young mind seems to think my old body can fulfill.  Perhaps I'm just a collector of projects.

suzuki43

  • Guest
Re: So what projects are on the go
« Reply #37 on: December 11, 2007, 06:23:01 pm »
Complete the 1983 RM 250D,finish off the RM125X and that will do! ;D

Offline GMC

  • Legend
  • *****
  • Posts: 3693
  • Broadford, Vic
    • View Profile
Re: So what projects are on the go
« Reply #38 on: December 11, 2007, 09:32:13 pm »
Lot's of good intentions but I am time poor.
HL 500  awaiting frame kit ::)
74 CZ 400  awaiting frame kit ::)
74 Maico 250  awaiting frame kit ::)
81 XT 500 awaiting engine rebuild
89 Beta trials awaiting engine rebuild
KTM 300 possibly awaiting sale to finance above.
RM 80 X awaiting son's enthusiasm before rebuild
G.M.C.  Bringing the past into the future

Shock horror, its here at last...
www.geoffmorrisconcepts.com

For the latest in GMC news...
http://www.geoffmorrisconcepts.com/8/news/

Offline maicomc490t

  • Legend
  • *****
  • Posts: 551
    • View Profile
Re: So what projects are on the go
« Reply #39 on: December 12, 2007, 12:09:15 am »

A stupid firey with two much time on his hands and can't organise it for shit!

3 x 81 MC490t's (1 roughie roundback to ride) and (two to sell - off to blasters on Monday)
1 x 81 MC250T
1 x 81 490 Bitza for number one son
1 x 72 501 (for CD5 - well that's the plan, lol)

= No time to do nuthin' else just yet !!!!  :o

VAPOUR (AKA HYDRA / HYDRO / AQUA / WET) BLASTING AND GENERAL ENGINEERING 0416074750 (or) [email protected]

DUCATI Parts wanted esp 450 R/T and other early models inc V-twins

BULTACO M49 parts wanted

Offline paul

  • Legend
  • *****
  • Posts: 4957
    • View Profile
Re: So what projects are on the go
« Reply #40 on: December 12, 2007, 05:20:25 am »
81 490
74/5   440 gp   for cd5
dave mac  were did you send it     turkey via the cape  back too  lenningrad fiji perth then to victoria  ;D ;D ;D ;D ;D :-\
« Last Edit: December 12, 2007, 07:51:51 am by paul »

Offline 500Fool

  • C-Grade
  • **
  • Posts: 138
    • View Profile
Re: So what projects are on the go
« Reply #41 on: December 12, 2007, 08:55:10 am »
I have to finish the spice rack, they keep falling out one end.

Fit the 1500cc big bore kit to the CT125.

There's never enough hours in the day, after watching Mel and Crotchy till 9 then replays of wheel of fortune till noon. Afternoon's snooze time then the soapys run through to those fine news programs, time to get the kentucky fried chicken for tea. A current affair, funniest home videos' (that baby breaking her legs was halarious) then relax with 15 longnecks.  Modern life has pressures they wouldn't have understood years ago. It takes nearly 12 months to get the $5000 baby bonus and the plazma screen needs updating.

You don't see many 50 year old world champions round but I recon a motivated man like me still has a chance, if I just had some money, some personality, good looks, some skill, don't need a bike cos I got the CT and once that big bore kits in nuthun'll catshit. Time to go, it's the wheel of forntune episode where Turp's makes the slipup with the purple tie and pink shirt. ;D Seeya's in the Tab.

Offline evo550

  • Legend
  • *****
  • Posts: 2435
    • View Profile
Re: So what projects are on the go
« Reply #42 on: December 12, 2007, 06:22:48 pm »
Turn this, into this, What shall I do for the other 11 days of Christmas?







[attachment deleted by admin]
« Last Edit: December 12, 2007, 06:39:19 pm by evo550 »

Maico31

  • Guest
Re: So what projects are on the go
« Reply #43 on: December 12, 2007, 09:49:23 pm »
Evo is that a GP2 phantom? Don't think i've ever seen one in Oz, there weren't any around here back in the day. Where did you find it?

Offline GMC

  • Legend
  • *****
  • Posts: 3693
  • Broadford, Vic
    • View Profile
Re: So what projects are on the go
« Reply #44 on: December 12, 2007, 10:13:20 pm »
Oh yeah, & a KDX 200  awaiting to be picked up.

It's a worry when your trying to do too many things at once & you forget what youv'e actually got.
G.M.C.  Bringing the past into the future

Shock horror, its here at last...
www.geoffmorrisconcepts.com

For the latest in GMC news...
http://www.geoffmorrisconcepts.com/8/news/