« previous next »
Pages: [1]   Go Down

Author Topic: suzuki rm 125d Jetting  (Read 1769 times)

0 Members and 1 Guest are viewing this topic.

Offline DR500

  • B-Grade
  • ***
  • Posts: 272
    • View Profile
suzuki rm 125d Jetting
« on: July 27, 2009, 03:16:57 pm »
Anyone have the best basic jetting for a rm 125d.Have just put new carby on but it came with the following jets.
needle 6DP17
needle jet 159 Q6
pilot 35
main 200.
Bike has a DG pipe.
Thanks for any info.
Logged

Offline suzuki27

  • Legend
  • *****
  • Posts: 853
    • View Profile
Re: suzuki rm 125d Jetting
« Reply #1 on: July 28, 2009, 05:18:12 pm »
The standard settings for the 125D are: Jet needle: 6FP35
                                                      Needle jet: Q-6
                                                      Main jet:270
                                                      Pilot     : 30
                                      Throttle Slide cut-away: 2.0
                                                   Float level:12-13mm
                                              Pilot air screw: 1 1/2 turns out
Logged

Offline DR500

  • B-Grade
  • ***
  • Posts: 272
    • View Profile
Re: suzuki rm 125d Jetting
« Reply #2 on: July 28, 2009, 08:51:50 pm »
Thanks,that a great help.Have played a bit with it and 150 main seems right at the moment.I will see what happens when i get up to connondale
Logged

RMJJ

  • Guest
Re: suzuki rm 125d Jetting
« Reply #3 on: July 31, 2009, 07:20:31 am »
Just out of interest, what is the new carb, is it a VM32ss or a normal VM32

Either way did you mean 250 main jet ?  150 seems very very small, I'm amazed it runs.
Logged

Offline DR500

  • B-Grade
  • ***
  • Posts: 272
    • View Profile
Re: suzuki rm 125d Jetting
« Reply #4 on: July 31, 2009, 08:31:21 am »
My typo error,main is 250.Carby is vm 32.Thanks
Logged
Pages: [1]   Go Up
« previous next »