« previous next »
Pages: [1]   Go Down

Author Topic: Yamaha '76 125X Forks.  (Read 1547 times)

0 Members and 1 Guest are viewing this topic.

mx250

  • Guest
Yamaha '76 125X Forks.
« on: February 20, 2009, 11:20:37 am »
Yamaha '76 125X Forks. 36mm dia.

Excellent condition. 1 x Gaiter look good and complete, other has piece missing in the clamp area (shouldn't effect function) includes correct clamps. One spec of rust between the triples, outside of the work area of forks (could be turned to the inside and never be seen ;)).

Currently have Suzuki caps. Might find the 'speedo tacho' gas canisters if you really need them. Axle clamp missing.

Sliders excellent - no rock gouges or gravel rash marks. Lacquer sun affected, cracked and flaking etc. Stickers still there but sun faded.

More available detailed photos if required, ask.

$125 ono. Postage at cost (I've sent forks to N.S.W. for about $10 and to Vic for about $15 ;)).

Logged

Offline JC

  • Legend
  • *****
  • Posts: 1245
    • View Profile
Re: Yamaha '76 125X Forks.
« Reply #1 on: February 24, 2009, 02:37:14 pm »
G,

If you still have them can you measure overall length from top of stanchion tube to centreline of axle pls?
Logged

mx250

  • Guest
Re: Yamaha '76 125X Forks.
« Reply #2 on: February 24, 2009, 07:40:01 pm »
Quote from: JC on February 24, 2009, 02:37:14 pm
G,

If you still have them can you measure overall length from top of stanchion tube to centreline of axle pls?
Yep, still have them - Length is 815mm with the caps giving an additional 30mm.
Logged

mx250

  • Guest
Re: Yamaha '76 125X Forks.
« Reply #3 on: February 25, 2009, 03:59:53 pm »
Going once, going twice........ ;D

Ya can't say I didn't offer. Any O.N.O.'s  8).

Or, it will be appearing on an Ebay near you shortly ;)
Logged

mx250

  • Guest
Re: Yamaha '76 125X Forks.
« Reply #4 on: March 03, 2009, 02:00:06 pm »
;D$125 ono. Postage at cost (I've sent forks to N.S.W. for about $10 and to Vic for about $15). ;D

I found the 'speedo/tacho' gas canisters and I'll offer them here for a few days before EvilPay ;D.

Missing one Schroeder valve.



« Last Edit: March 03, 2009, 02:02:53 pm by mx250 »
Logged

mx250

  • Guest
Re: Yamaha '76 125X Forks.
« Reply #5 on: March 03, 2009, 10:10:43 pm »
I'll swap for Monty parts, especially Cappra/Enduro wheels. V75 airbox, Seat. Cota 248 bits.
Logged

Offline LWC82PE

  • Superstar
  • ******
  • Posts: 6006
    • View Profile
    • PE motorcycles & SuzukiTS.com
Re: Yamaha '76 125X Forks.
« Reply #6 on: March 03, 2009, 10:23:46 pm »
will you be keeping the 78 RM caps you had fitted first up?
Logged
Wanted - 1978 TS185 frame or frame&motor. Frame # TS1852-24007 up to TS1852-39022

mx250

  • Guest
Re: Yamaha '76 125X Forks.
« Reply #7 on: March 04, 2009, 04:13:28 pm »
The cap are still available. Probably sell separately.
Logged
Pages: [1]   Go Up
« previous next »