Wide Footpegs to suit 1977 RM125

[Ozadvntr]

Any ideas on what wide foot pegs would suit a 77 RM125?

TIA

[Glen08]

I put a set of 94 yz125 peg's on a 78 with no drama.

[Ted]

Don’t waste your time putting wide pegs on original mounts. They will snap the mounts off. Cut the mounts off and weld on late model YZ pegs and mounts. I just put on a set of titanium pegs from a YZ. $50 from the wreckers, I got lucky.  I can’t put up pictures here but if you send me your mobile I’ll text you the pics. 0407004473

[Curtis]

I just put a set of generic pit bike pegs on my 78 RM. some very minor grinding to fit.
I put big pegs on all my vintage bikes and have never snaped the mount, maybe it depends how much you weigh??

[mick25]

Heavy landings off jumps put a lot of stress on the foot peg mounts and tubby riders 

[Ted]

What would Liam Beverly weighed 4 years ago Mick, under 70 kgs? Snapped it clean off at Port Augusta Nats with the standard pegs and mounts.

[Curtis]

There you go, he didnt even have oversize pegs. 40 year old dirt bikes taking a pounding anything can happen.

[Ted]

Somebody put peg wideners on it before I bought it. If you feel comfortable with Chinese pit bike  pegs go for it.

[John Orchard]

Those 77 RM peg mounts must be weak, l broke the peg mount off my mates RM250B just kickstarting it !!!

[Curtis]

Iv got some aftermarket KTM alloy pegs here that can be made to fit easily.....if you want them?

[Ted]

They are piss weak John. I sent the guy some pics of a far stronger set up. Got some late model titanium YZ pegs and mounts on the B now. It is a great bike?
Aftermarket alloy are worse than Chinese pegs. Steel or titanium are the go

[John Orchard]

l have Chinese stainless pegs on my KX400, Firko gave me the heads-up on them, they look identical to the pegs on an Atomik 250 that is hiding down the back corner of the shed ;-) these pegs cost me $12 delivered, with pins & springs (although not needed for this application).

The steel is so hard, l had a bitch of time trying to drill / grind the pin hole out from 8mm to 10mm!

[craigclayton]

I put a set  of second hand KTM pegs fon mine, 20 minutes of grinding just at the back to get them to sir 90 degrees to the frame. All good