Author Topic: 1984/5 Husqvarna WR240  (Read 2403 times)

0 Members and 1 Guest are viewing this topic.

Offline bigk

  • Legend
  • *****
  • Posts: 2655
  • Kangaroo Flat Victoria
    • View Profile
1984/5 Husqvarna WR240
« on: March 28, 2017, 03:25:22 pm »
I have a half decent 1984/5 Husky WR240 (twin shock, liquid cooled). It's reasonably tidy & did run, although last time I started it, it stopped. I pulled the top end off & found a perfect standard bore & piston, however the rod is very tight, so it needs a rod kit at least (I would bore it .5mm over for good measure). It's way down the list of bikes to get to, so available for someone who wants a ripper, rare vinduro bike. The bike has an Australian compliance plate, is complete minus muffler, the seat has been re-done as standard except the blue section is gripper material, comes with new rear mudguard & full graphics kit. The bike is located in Bendigo, Victoria. The price is $2,500 & is non negotiable! You'll find a much, much worse one listed on ebay for a whole lot more money. Ph: 0417394889 or email: [email protected] for details.

Offline jimbo

  • C-Grade
  • **
  • Posts: 80
    • View Profile
Re: 1984/5 Husqvarna WR240
« Reply #1 on: March 28, 2017, 08:35:24 pm »
 Small world sometimes Mick, just bought my old bike back,they are great fun .
« Last Edit: March 28, 2017, 09:04:38 pm by jimbo »

Offline 80-85 husky

  • Legend
  • *****
  • Posts: 3847
    • View Profile
Re: 1984/5 Husqvarna WR240
« Reply #2 on: March 28, 2017, 08:43:17 pm »
its probably my old scooter.... :(

Offline Slakewell

  • Legend
  • *****
  • Posts: 3577
  • Slakewell Motordrome
    • View Profile
Re: 1984/5 Husqvarna WR240
« Reply #3 on: March 29, 2017, 09:16:24 am »
Tempting. A very nice Vinduro bike.
Current bikes. KTM MC 250 77 Husky CR 360 77, Husky 82 420 Auto Bitsa XR 200 project. Dont need a pickle just need to ride my motorcickle