TNT 250 rod options

[Husky500evo]

I am in need of a new conrod kit to suit a '75 Can AM TNT250. Does anyone out there know of an alternative option that will do the job , as I am told that the original Rotax rod kit is no longer available ? 

[evo550]

Do Can am use the type 244 rotax engine?

[Canam370]

Emailed you Mark.

[Husky500evo]

Not sure if the TNT motor is called a 244 Rotax . I just know that they are a shorter stroke than the ones used for the MX4 and later Can Ams and ATKs etc .

[evo550]

Not sure if the TNT motor is called a 244 Rotax . I just know that they are a shorter stroke than the ones used for the MX4 and later Can Ams and ATKs etc .

yeah, that's where I was headed with that. Have you tried Bert Floods?

[Lozza]

A 120mm or 125mm rod ? Have you tried Tony Murphy in the USA?

[Husky500evo]

Was told that Bert Flood doesn't have any Rotax stuff left . I have emailed Tony Murphy . I have a good crank , which I think is from an MX6 Can Am 250 , which has a rod that is about 5 mm longer than the one I need .

[Canam370]

They still have engine stuff left - just not Canam stuff.

[evo550]

Was told that Bert Flood doesn't have any Rotax stuff left . I have emailed Tony Murphy . I have a good crank , which I think is from an MX6 Can Am 250 , which has a rod that is about 5 mm longer than the one I need .

Floods still has Rotax parts for the old 2t motorcycle engines. Just bought some gear there last week, ordered one day, delivered the next.

[Husky500evo]

OK , I will give Bert Floods a try , as well . Thanks for the heads up .

[bigk]

I'm sure I've seen new rods on one of the Can Am/ SWM sites I've perused over the years. One of the USA sites but can't remember which one. Might be worth a google & some browsing.
K

[supermotomc]

https://shop.brp-rotax.fr/en/

[Husky500evo]

I ended up buying a TNT250 rod kit and some other Rotax bits from Tony Murphy in the USA . Al Roberts , in Texas , has rod kits as well . But they are no longer available from Rotax .