Suzuki Alloy Swingarm RM 250 C2 1978 etc

[Husabergpete]

Guys a young fulla here in Wollongong is trying to get his C2 RM 250 1978 together to start racing.

Bike has an N or T swingarm on it but would like to put it back to Standard.

He is also looking for the airbox.

PM or call me on 0428 384800

Ta Pete

[vlxk]

I know of a C2 chassis located in Warrensburg Missouri. It has the correct swing arm, I know because I bought the Boge LTG shocks off of it.

The air box is like most these days, back side is broken out. There is a place in Arizona I believe, AMS Racing, that has a fiberglass replica of the airbox, but it requires the hardware off the original.

I know parts in the "Lower 48" creates shipping and currency exchange problems, but in the end it may be the only way to get what you need.

Kenny

[Husabergpete]

Kenny,

Thank you for the info. Might get the name of the guy or place who has the C2 just in case. At the moment an Aussie guy has told me he has 2 400 C2 swingarms. He is about 1000ks away.

We are not sure if the 400 one is the same as the 250 swingarm. Maybe someone will know or we should check the part numbers.

These old Suzuki airboxes are a bit of a headache. Did a 125 A, 370 A and 125 C and they all needed them to get away from the Pods that people used to thing were the go.

Once again thanks

Pete

[Oldfart]

250 and 400 c2  swingarms are the same as they share the same part number 61101-41810