Author Topic: Montesa engine ID question. (Read 4067 times)

Rider · « **on:** February 25, 2015, 09:29:47 pm »

Picked up a 250 montesa engine at the Ballarat swap meet #73M8587. I know it's a Cappra but what year ? If I find the year I should be able to source what the ratios are.( I'm considering a long term road race project).
Thanks Terry.

Mick D · « **Reply #1 on:** February 25, 2015, 09:40:40 pm »

73M is a 250 Cappra engine Terry, but unfortunately I don't know what year all the following digits make it

Good luck.

Rider · « **Reply #2 on:** February 25, 2015, 09:48:36 pm »

Thanks Mick , I suspect it is a later model 75/76 but am hopeful someone has some clearer info on number runs.

67LaCrosse · « **Reply #3 on:** February 26, 2015, 01:14:52 pm »

Hi Terry

Your engine is from a early 1975 Cappra 250 V-75.
Hope that helps.

Regards Patrick.

Rider · « **Reply #4 on:** February 26, 2015, 08:16:56 pm »

Yes that helps, thanks Patrick.

k2000x · « **Reply #5 on:** February 27, 2015, 02:14:48 pm »

If you want to sell it I will buy it I've got a roller

cappra · « **Reply #6 on:** February 27, 2015, 04:37:45 pm »

The cylinder to have is from the 1976 VA 250. Bigger exhaust port, (no bridge) much larger intake. Transmission ratio's were the same on all VR's.

OzVMX Forum

Author Topic: Montesa engine ID question. (Read 4067 times)

Rider

Montesa engine ID question.

Mick D

Re: Montesa engine ID question.

Rider

Re: Montesa engine ID question.

67LaCrosse

Re: Montesa engine ID question.

Rider

Re: Montesa engine ID question.

k2000x

Re: Montesa engine ID question.

cappra

Re: Montesa engine ID question.